Specifications - Sony DWR-R02D Operating Instructions Manual

Specifications

Receiving Section
Receiver Type Rackmount (2 channels)
Transmission Method
WiDIF-HP (×2)
Reception Type
Space diversity
Circuit System
Double superheterodyne
Local Oscillators Type
Crystal-controlled PLL synthesizer
Antenna Type Detachable
RF Sensitivity 20 dBµ or less (at bit error rate = 1 × 10
no decline in S/N ratio)
Antenna Section
Input Connector
BNC-R, 50 Ω (×2)
Supply Voltage for Booster
0 V/9 V/12 V
Attenuator 0 dB/5 dB/10 dB
Cascaded Output
BNC-R, 50 Ω (×2)
Audio section
Dynamic Range 106 dB or more (A-weighted)
Distortion (T.H.D)
0.03% or less
Audio Delay 1.9 ms (analog output)
1.9 ms (digital output)
Analog Output BAL: XLR-3-32 (male), 47 Ω or less
(×2)
UNBAL: φ6.3 mm (
220 Ω or less (×2)
Output level (0 dBu = 0.775 Vrms)
BAL: –22 dBu maximum/–58 dBu
reference (when MIC output)
BAL: +24 dBu maximum/–12 dBu
reference (when LINE output)
UNBAL: +8 dBu maximum/–28 dBu
reference (when UNBAL ATT =0 dB)
Digital Output XLR-3-32 (male), 110 Ω (×1)
BNC-R, 75 Ω (×1)
Reference output level (0 dBu =
0.775 Vrms)
–36 dBFs
Other Equipment
Headphone Output
φ6.3 mm (
42
Specifications
1
/ inch) mono jack,
4
1
/ inch) stereo jack
4
Input connector: BNC-R with a 75 Ω
Word Sync
Output connector: BNC-R
External Word Sync: 32 kHz to 96 kHz
Wireless Remote Control
Cross Remote (2.4-GHz IEEE802.15.4
LAN Connector RJ-45 modular jack
100BASE-TX: IEEE802.3u compliant
10BASE-T: IEEE802.3 compliant
Display OLED
General
Power Requirements
AC: 100 to 240 V 0.4 A or less
–5
DC: 12 V 1.6 A or less
,
Power Consumption
AC: 24 W
DC: 19.2 W
Operating Temperature
0 °C to 50 °C (32 °F to 122 °F)
Storage/Transport Temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Dimensions (unit: mm (inches))*
Mass Approx. 3.6 kg (7 lb 15 oz) (including the
Supplied Accessories
Whip antenna (2)
Antenna mount with BNC connector (2)
AC power cord (1)
Foot (4)
Operating Instructions (1)
Operating Instructions (CD-ROM) (1)
PC control software (CD-ROM) (1)
Warranty card (US models only) (1)
termination switch
compliant)
* The values for dimensions are approximate.
attached antenna)