Table of Contents
Advertisement
Encrypted Transmission Function
(ENCRYPTION)
Set the parameters for the encrypted transmission function.
SECURE KEY: Sets the encryption key method.
PASSWORD: Sets the password method.
OFF: The encrypted transmission function is not used.
For details, see "Using the Encrypted Transmission
Function" on page 26.
Setting Analog Audio Output Level
(BAL OUT LEVEL)
Selects analog audio output level for the ANALOG
BALANCED OUT 1/2 connectors.
MIC: Selects the microphone level (reference level: –58
dBu).
LINE: Select the line level (reference level: –12 dBu).
Setting the Attenuator for the Analog
Unbalanced Output
Set the attenuator level for the analog unbalanced output.
0dB/3dB/6dB/9dB/12dB/15dB/18dB/21dB
Ground Lift Function
When LIFT is selected, pin 1 (GROUND) of the XLR
connector is lifted from the chassis grounding to prevent
hum, buzz, and other noise caused by ground loops.
GROUND: Connects pin 1 (GROUND) of the XLR
connector to the chassis grounding.
LIFT: Lifts pin 1 (GROUND) of the XLR connector from
the chassis grounding.
Note
Select LIFT only in environments where hum, buzz, and
other noise occur. Selecting it may make the unit more
susceptible to exogenous noise.
(UNBAL OUT ATT)
(GROUND LIFT)
TRANSMITTER
(Transmitter Virtual)
Menu
You can view the status of the transmitter by using the
transmitter virtual menu and displaying metadata received
from the transmitter in the display.
For details on menu operation, see "Basic Menu
Operations" on page 27.
For details on how to change the setting information of the
transmitter, see "Changing the Settings on the
Transmitter" on page 35.
The Sony digital wireless transmitter sends not only digital
audio signals, but also various other information
(metadata) related to transmitter settings.
RF audio signal
Metadata
Wireless remote control
Transmitter settings
Note
"NO DATA" appears when the transmitter is turned off or
located outside the service area. "NO FUNCTION"
appears when the transmitter does not have the metadata
transmission function.
In this section, displayed transmitter settings are
explained.
Display of the Transmitter Name
(NAME)
The name setting of the transmitter is displayed.
TRANSMITTER (Transmitter Virtual) Menu
29
Advertisement
Table of Contents
