1. Manuals
  2. Brands
  3. Asante Manuals
  4. Network Router
  5. IntraCore IC3624PWR
  6. User manual

Asante IntraCore IC3624PWR User Manual

Layer 2+ power over ethernet (poe) switch with dual gigabit
Hide thumbs Also See for IntraCore IC3624PWR:
Table of Contents

Advertisement

Quick Links

Download this manual
®
IntraCore
IC3624PWR
Layer 2+ Power over Ethernet (PoE) Switch
with Dual Gigabit
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IntraCore IC3624PWR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Asante IntraCore IC3624PWR

Summary of Contents for Asante IntraCore IC3624PWR

  • Page 1 ® IntraCore IC3624PWR Layer 2+ Power over Ethernet (PoE) Switch with Dual Gigabit User’s Manual...
  • Page 2 AsantéCare, Auto-Uplink, and IntraCare are trademarks of Asanté Technologies, Inc. All other brand names or product names are trademarks or registered trademarks of their respective holders. All features and specifications are subject to change without prior notice. Rev. A 10/22/04 IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 3: Table Of Contents

    3.3.4 Rack Mounting ...13 3.4 Preparing for Installation...14 3.5 Unpacking and Inspecting ...14 3.5.1 Recommended Tools ...15 3.6 Installing the Switch...15 3.6.1 Mounting the Switch in a Rack...15 3.6.2 Desktop or Shelf Mounting...16 IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 4 6.2 Basic Configuration Menu ...30 6.2.1 Administration Configuration ...31 6.2.2 IP Configuration ...32 6.2.3 SNMP Configuration ...32 6.2.4 Port Configuration ...37 6.2.6 Forwarding DB ...38 6.2.7 SNTP Configuration ...39 6.2.8 ARP Table...40 IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 5 A.4 In-Band Access...77 Appendix B: Specifications...79 Appendix C: Cables and Pin Assignments...81 C.1 Twisted-Pair Cable and Pin Assignments ...81 C.1.1 Pin Assignments for 10BaseT/100BaseTX...81 C.1.2 Straight-Through Wiring ...82 C.1.3 Crossover Wiring...82 IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 6 C.4 Fiber Standards ...83 Appendix D: FCC Compliance and Warranty Statements...85 D.1 FCC Compliance Statement ...85 D.2 Important Safety Instructions ...85 D.3 IntraCore Warranty Statement ...86 Appendix E. Online Warranty Registration...87 IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 7: Chapter 1: Introduction

    Chapter 1: Introduction The IntraCore IC3624PWR Layer 2+ Power over Ethernet (PoE) with Dual Gigabit (IC3624PWR) is a product you can use to build your next generation network. The IC3624PWR device uses Layer 2+ technology and has 24 ports for 10/100/1000BastTX Fast Ethernet with 2 combination ports for added 10/100BaseT Gigabit Ethernet.

  • Page 8: Performance

    RMON Groups 1, 2, 3 and 9 1.2 Network Management Options The IntraCore IC3624PWR provides both local and remote management. You can configure or monitor the switch using the embedded management software or by using SNMP applications. You can manage the switch by a direct connection to the RS-232 console port (out-of-band), or a network connection (in-band) using Telnet, or the on-board Web agent.

  • Page 9: Chapter 2: Network Planning

    Management Access Overview SNMP Access Protocols 2.1 Management Access Overview You can access and manage the IC3624PWR Managed Switch using the following methods: Administration console Web browser interface External SNMP-based network-management application The administration console and Web browser interface support are embedded in the switch’s firmware and available for immediate use.

  • Page 10: Snmp Access

    Menu or CLI interfaces available Communicate at the Management Information Base (MIB) level Based on open standards IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit Disadvantages Must be near switch or use dial-up connection Not convenient for remote users...

  • Page 11: Protocols

    SNMP runs on top of the User Datagram Protocol (UDP), offering a connectionless-mode service. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 12: Chapter 3: Hardware Installation And Setup

    IC3624PWR PoE switch at your site. 3.1 Installation Overview 1. Follow these steps to install the IntraCore IC3624PWR PoE switch: 2. Open the box and check the contents. For a complete list of the items included with the switch see “Equipment Checklist”...

  • Page 13: Site Requirements

    Frequency range: 50/60 Hz 3.3.3 Cooling and Airflow The IC3624PWR PoE switch use internal fans for air-cooling. Do not restrict airflow by covering or obstructing air vents on the sides of the switch. Operating Temperature: 32° to 104°F (0° to 40°C) Relative Humidity: 10% to 90% non-condensing 3.3.4 Rack Mounting...

  • Page 14: Preparing For Installation

    Four adhesive foot pads A Rack Mounting Kit Two brackets Four screws for attaching the brackets An AC Power Cord An RS-232 console cable Contact your dealer immediately if any item is missing. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 15: Recommended Tools

    Repeat the two previous steps on the other side of the switch. Place the switch in the equipment rack. Secure the switch attaching the mounting brackets onto the equipment rack with the screw supplied with the unit. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 16: Desktop Or Shelf Mounting

    Warning: For International use: if you use power other than AC, you must use power cords that meet the appropriate standards for the power you are using. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 17: Ethernet Cabling

    The on-board configuration program can be accessed from a terminal or a PC running a terminal emulation program. The pin assignments used to connect to the serial port are provided in the following tables. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 18: Wiring Map For Serial Cable

    Default Baud rate—9,600 bps Character Size—8 Characters Parity—None Stop bit—One Data bits—8 Null Modem PC’s 9-Pin DTE Port 3 TXD (transmit data) " 2 RXD (receive data) 5 SGND (signal ground) IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 19: Chapter 4: Connecting Network Devices

    As each connection is made, the Link LED (on the switch) corresponding to each port lights up to indicate that the connection is complete. (For more LED information see, “Interpreting LEDs” later in this chapter.) IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 20: Network Wiring Connections

    The LEDs are located on the front panel. Equipment Rack (side view) w it ch 10 /1 0 0 6 7 2 4 L 3 ES4524C Punch-Down Block Patch Panel IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit Wall...

  • Page 21: Connectivity Guidelines

    The port has a valid 10 Mbps link. Flashing indicates activity. The port has a valid 100 Mbps or 1000 Mbps link. Flashing indicates activity. Length 100 m (328 ft) Length 100 m (328 ft) IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit Connector RJ-45 Connector RJ-45...

  • Page 22: Cable Labeling And Connection Records

    Use sequential numbers for cables that originate from the same equipment. Name racks to help differentiate between them. Label each piece of equipment. Display a copy of your equipment map, including keys to all abbreviations, at each equipment rack. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 23: Chapter 5: Configuring The Switch

    Using this method, you can view the administration console from a terminal, PC, Apple Macintosh, or UNIX workstation connected to the switch’s console port. The following figure shows an example of this management method. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 24: Direct Access

    Follow these steps to set up the connection. Note; the graphics in this example show the HyperTerminal on a PC. 1. Click the Start button. 2. Select Accessories and then Communications. 3. Select HyperTerminal IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 25 The following screen appears. 1. In the drop down box labeled Connect Using:, click the arrow and choose the desired COM port. (In the example below, COM1 is the port selected.) 2. Click OK. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 26: Initial Logon

    When the HyperTerminal window opens and you are connected to the switch the following screen appears. If you do not get a login screen or main menu, press the return key. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 27 To use the arrow keys when attached to the User Interface using a Telnet Session, under the terminal pull down menu choose Properties and activate the VT100 Arrows option. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 28: Chapter 6: Using The Interface

    The General Information Menu allows you to review information about the switch. Following are two examples of this screen. The first example shows the screen using the GUI interface the second example shows using the interface from a telnet session. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 29 IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 30: Basic Configuration Menu

    Name of system (user defined) Location of system (user defined) Contact information (user defined) MAC Address of system Default IP address (user defined) Default Subnet mask (user defined) Default gateway (user defined) Enabled/Disabled DHCP function IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 31: Administration Configuration

    From the Admin Configuration screen, you can enter system-related information for reference such as System Name, System Location, and System Contact Information. Map: Main Menu->Basic Configuration Menu->Administration Configuration Note: The system Description and Object ID are not configurable. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 32: Ip Configuration

    You can manage the switch using the SNMP from a network management station. Map: Main Menu->Basic Configuration Menu->SNMP Configuration IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 33 Ethernet Interface MIB (RFC1643) Bridge MIB (RFC1493) Private Enterprise MIB 4-Group RMON (RFC1757) The SNMP Configuration submenu has four options: SNMP Configuration Trap Configuration Individual Trap Configuration Quit to previous menu IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 34 Set the access privilege, 1 is Read-only and 2 is Read-Write. Set Manager IP: Set the IP address of a specified community. The access is restricted to specified IP only. Set Manager Community: Set community string. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 35 Add Link Down Trap Ports: Delete Link Down Trap Ports: Enable or disable the authentication failure trap. Add individual port onto the trap list. Delete individual port from the trap list IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 36 There are five submenus are available from this screen Community string, Status and Privilege. Enable/Disable Authorization Fail Trap Add Link Up/Down Trap Ports Delete Link Up/Down Trap Ports Enable/ Disable PoE Trap Quit to previous menu IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 37: Port Configuration

    Change the password of local user Enable or disable the system accessibility using telnet. Enable or disable the system accessibility using SNMP Enable or disable the system accessibility using web browser IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 38: Forwarding Db

    VLAN, or MAC address. Use the Static Addresses Table to specify Media Access Control (MAC) addresses for specific ports that you do not want to be purged from the table by the aging function. Map: Main Menu->Basic Configuration Menu->Forwarding DB IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 39: Sntp Configuration

    Depending on the business model, Simple Network Time Protocol (SNTP) synchronizes the network and the services provided. You determine network performance according to the types of services needed by network management systems and engineering resources. <ENTER> IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 40: Arp Table

    Use to set up the daylight saving 6.2.8 ARP Table Use this sub command to set the Address Resolution Protocol (ARP) table timeout, add or modify a static entry and establish the sorting method. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 41: Advanced Switch Configuration

    Link Aggregation Port Monitoring Configuration Multiple Spanning Tree Configuration Access List Configuration Quality of Service Configuration Storm Control Configuration 802.1 Port Based Access Control Configuration SMNP Snooping Configuration Power Over Ethernet Configuration IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 42: Vlan Management

    Use the VLAN Table Configuration screen to create a new VLAN, add new ports to an existing VLAN, remove ports from an existing VLAN, delete a VLAN, set management status or set GVRP status. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 43 2. Enter the VLAN ID and name in the appropriate fields 3. Add the VLAN members 4. Click Apply Follow these steps to delete a VLAN Group: 1. Select Delete VLAN 2. Enter the corresponding VLAN ID IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 44 Use this sub menu to individually configure VLAN ports. Map: Main Menu->Advanced Switch Configuration->VLAN Management->VLAN Port Configuration Four options are available from the VLAN Port Configuration screen. Set Port VID Set Frame Type IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 45: Link Aggregation

    There are seven options available from the Link Aggregation submenu. Set System Priority Add a Group Member Delete a Group Member Modify a Group Mode Set Port Priority LACP Group Status IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 46 The default system priority is the same in all ports. To set up a port with a different priority in the link aggregation, use the Set Port Priority. Map: Main Menu->Advanced Switch Configuration->Trunk Configuration->Set Port Priority IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 47: Port Monitoring

    This switch supports IEEE 802.1s Multiple Spanning Tree (MSTP). An independent spanning tree is established per VLAN. Map: Main Menu->Advanced Switch Configuration->MST Configuration There are 11 submenus at MSTP Configuration Menu: IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 48 Set MSTP Protocol Version Set MSTP Configuration Name Set MSTP Revision Level CIST Configuration CIST Basic Port Config CIST Advanced Port Configuration MSTP Instance Configuration Designated Topology Regional Topology Quit to previous menu IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 49 Sets the revision level The Common Instant Spanning Tree Configuration Menu allows you to configure the switch-wide parameters, such as Cist Hello Time, Cist Maximum Age, Cist Forward Delay, and so on. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 50 Sets the Cist bridge priority. Sets the interval between two hello packets. Sets the maximum age time. Sets the forward delay. Sets the maximum hop count delay. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 51 6.3.4.2 CIST Basic Port Configuration Set the port priority, the path cost for each port and enable or disable the port STP status to increase the network efficiency. Map: Main Menu->Advanced Switch Configuration->MSTP Configuration->CIST Configuration IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 52 Use the MSTP Instance Configuration screen when configuring a small tree in the MSTP. One Instance can have more than one VLAN. In this page, you can add, remove VLAN or remove, for the MST Instance and Instance Port configuration. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 53 Map: Main Menu->Advanced Switch Configuration->MSTP Configuration->MSTP Instance Configuration IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 54 6.3.4.5 Designated Topology Information Use this screen to view topology information, the status of the links and designated root, bridge and port numbers. Map: Main Menu->Advanced Switch Configuration->MSTP Configuration->Designated Topology Information IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 55 6.3.4.6 Regional Topology Information This page shows regional topology information. Map: Main Menu->Advanced Switch Configuration->MSTP Configuration->Regional Topology Information IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 56: Access List Configuration

    A policy consists of classifier, precedence port list, in /out profile or no match action. When packets enter, a DS domain traffic flow should be conditioned at the DS ingress node of the DS domain according to the appropriate policy. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 57 Use this submenu to create, delete and modify classifier fields. Map: Main Menu->Advanced Switch Configuration->Access Control->Classifier Configuration Menu Three commands are available in this screen. Create Classifier Delete Classifier Modify Classifier Classifier IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 58 MAC field Selected packets depend on destination MAC address specified in Ethernet header destination MAC field Selected packets depend on VLAN ID value specified in Ethernet header VID field IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 59 Use this submenu to create or delete classifiers, join classifiers, remove, classifiers, set classifier group names. 6.3.5.3 In Profile Action From this screen you can create, delete, and modify the action for the different in-bound profiles. Map: Main Menu->Advanced Switch Configuration->Access Control->In Profile Action IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 60 6.3.5.4 No Match Action From this screen you can create, delete, and modify the action for the different actions where there is no match. Map: Main Menu->Advanced Switch Configuration->Access Control->No Match Action IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 61 From this screen you can create, delete, and modify the action for the different out-bound profiles. Map: Main Menu->Advanced Switch Configuration->Access Control->Out Profile Action Three options are available in this menu. Create Out-Profile Action Delete Out-Profile Action Modify Out-Profile Action Out Profile Action IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 62 An ingress port in its role in handling traffic as it enters one or more ports you want to do differentiated service. Three options are available from this screen. Create Port List Delete Port List Modify Port List IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 63: Quality Of Service Configuration

    Use this submenu to set the traffic class mapping method. Map: Main Menu->Advanced Switch Configuration->Quality of Service Configuration->Mapping Method The following three functions are available from this screen. QoS Status Traffic Class Mapping Scheduling Method Configuration IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 64: Storm Control

    Map: Main Menu->Advanced Switch Configuration->Storm Control There are three types of storm control settings used to enable, disable and set the threshold value to control the network traffic. Broadcast Multicast IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 65: 802.1 Port Based Access Control

    Use this menu to set 13 functions. NAS ID Port Number Port Control Port Control Direction Transmission Period Supplicant Timeout Server Timeout Maximum Request Quiet Period Reauthorization Period Reauthorization Status Initialize Reauthorize Initialization IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 66: Igmp Snooping

    IGMP Snooping Global Configuration: Set IGMP Snooping Status Set Host Port Aged Time Set Rout Port Aged Time Set Report Interval Show VLAN Filter Table Show Router Port Table Quit to previous menu IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 67 Set up the VLAN that you do not want to be snooping in the set VLAN Filter Table menu. Show the results of your configuration using this feature. Map: Main Menu->Advanced Switch Configuration->IGMP Snooping->Show IGMP Snooping VLAN Filter Table IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 68: Power Over Ethernet

    LAN. With Power-over-Ethernet system, you need to only run a single CAT5 Ethernet cable that carries both power and data to each device. Map: Main Menu->Advanced Switch Configuration->Power over Ethernet There are three submenus. PoE Port Configuration PoE Global Configuration Quit to previous menu IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 69 The priority of a PoE port. Three selections are available, critical, high and low. When the power consumption over the power budget, the critical has higher priority on power supplying. Limit(mW): The maximum power supplied to a port. The default is 15.4W or 15000mW IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 70 Sets the action to take when the power sink over the power budget. One of the following two Method: selections, 1) Low priority port will be shut down; 2) Deny next port connection. Detection Method: Enable or disable the power capacitor detection IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 71: Statistics

    Use this submenu to view statistics about the switch. Map: Main Menu->Statistics You can view the entire switch, select individual ports, refresh the screen to view current statistics or view statistics since the last reset. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 72: Tools

    Map: Main Menu->Tools->TFTP Software Upgrade Warning: The previous version of runtime image will be lost when the procedure completes. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 73: Configuration File Upload/Download

    Spanning Tree forwarding mode. This can take up to three minutes. 6.5.2 Configuration File Upload/Download Use this submenu to set addresses, establish configuration file names, upload and download files from one server to another. Map: Main Menu->Tools->Configuration File Upload/Download IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 74: System Reboot

    Stop Ping Enter the server IP address to get the TFTP server Enter the file name that you want to configuration Upload your configuration file Download configuration file from TFTP server IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 75: System Log

    6.5.5 System Log Use this submenu to observe system behavior. You can clear the system log by selecting Clear System Log. Map: Main Menu->Tools->System IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 76: Save Configuration

    To save the configuration to Flash memory select Save Configuration and then press either ‘Enter’ or ‘Y’. 6.7 Run CLI Use this submenu to configure the switch using the command line interface (CLI). To return to the menu-driven interface type “exit”. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 77: Appendix A: Basic Troubleshooting

    IP address, and that the port through which you are connecting to the switch has not been disabled. If it has not been disabled, check the network cabling that runs between the remote location and the switch. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 78 Caution: The management agent can accept up to four simultaneous Telnet sessions. If you are at maximum number of sessions, an additional Telnet connection can not log into the system. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 79: Appendix B: Specifications

    Appendix B: Specifications The sections below list the features and product specifications for the IntraCore IC3624PWR PoE switch. Physical Characteristics Ports 24 10/100BaseTX with auto-negotiation 2 Combination Ports (RJ-45/SFP), 10/100/1000BaseT or 1000BaseX Network Interface RJ-45 connector, auto MDI/X 10BaseT: RJ-45 (100-ohm, UTP cable; Categories 3, 4, 5) Maximum Cable Length - 100 m (328 ft) 100BaseTX: RJ-45 (100-ohm, UTP cable;...
  • Page 80 Standards IEEE, ISO, IEC IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX/LX IEEE 802.3x full duplex flow control Compliances CE Mark Standard Emissions FCC Class A Safety IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 81: Appendix C: Cables And Pin Assignments

    Receive Data plus (RD+) Receive Data minus (RD-) 4, 5, 7, 8 X Signal Name Receive Data plus (RD+) Receive Data minus (RD-) Transmit Data plus (TD+) Transmit Data minus (TD-) IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 82: Straight-Through Wiring

    All 1000BaseT ports support automatic MDI/MDI-X operation, so you can use straight-through cables for all network connections to PCs or servers, or to other switches or hubs. White/Orange Stripe Orange White/Green Stripe Green White/Orange Stripe Orange White/Green Stripe Green IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit End B End B...

  • Page 83: Cable Testing For Existing Category 5 Cable

    Bi-directional Data Two Minus (BI_D2-) Bi-directional Data One Plus (BI_D1+) Bi-directional Data Four Plus (BI_D4+) Bi-directional Data Four Minus (BI_D4-) Bi-directional Data One Minus (BI_D1-) Bi-directional Data Three Plus (BI_D3+) Bi-directional Data Three Minus (BI_D3-) IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...
  • Page 84 TIA 568-B allows the use of 50/125 micron multimode optical fiber in both the horizontal and backbone in addition to the types listed above. All optical fiber components and installation practices must meet applicable building and safety codes. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 85: Appendix D: Fcc Compliance And Warranty Statements

    Never spill liquid of any kind on the product. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to service personnel. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

  • Page 86: Intracore Warranty Statement

    Other Countries: See your local distributor or reseller. Asante Technologies warrants (to the original end-user purchaser) the covered IntraCore products against defects in materials and workmanship for the period specified above. If Asante receives notice of such defects during the warranty period, Asante will, at its option, either repair or replace products that prove to be defective.

  • Page 87: Appendix E. Online Warranty Registration

    Appendix E. Online Warranty Registration Please register the switch online at www.asante.com/support/warranty/index.html. By doing so, you’ll be entitled to special offers, up-to-date information, and important product bulletins. IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit...

This manual is also suitable for:

Intracore 3624pwr

Table of Contents

Save PDF