When "Borderless Printing" is enabled
Top, bottom, left, right margins: 0 mm (Typical value)
Center of paper width
Auto-cut position
Auto-cut position
Outer edge (Removed)
2.0 mm
If you enabled "Borderless Printing", printing is done with settings for no margins, but the
Even if "Borderless Printing" is enabled, the maximum value for the print area width is
222
Paper width
Print area width
printing might protrude beyond the paper/label, depending on the actual print position
and the set position for the paper/label. To make sure printing does not protrude out,
ensure margins of 1.5 mm {0.06"} or more in the print data.
104 mm {4.09"}.
Paper feeding direction
Outer edge (Removed)
2.0 mm
Print area
Label area
Backing paper