Epson TM-C3500 Series Technical Reference Manual page 141

Trouble
As the paper feeding
amount varies
depending on the
paper being used,
white lines or black
lines may be printed.
[Banding Reduction] is
The print result is faded
not selected.
or has lines (black/
white)
(Lines printed while
feeding by 25.4 mm/1
inch could be
improved; however,
you cannot remove
them completely.)
[Quality] is not
selected in [Print Qual-
ity].
Roll paper is not
loaded correctly.
Fanfold paper is not
loaded correctly.
Description
Adjust the alignment of paper feed.
On the [Printer Utilities] tab, click
[Printer Setting Utility].
When the PrinterSetting screen is
displayed, click [Printer Adjustment]
- [Print Head Alignment], and per-
form [Bi-directional Printing Adjust-
ment].
See the following for details.
"How to Make Media Settings" on
page
"Print Head Alignment" on page 137
When the paper type is set to other
than [Plain] or [Plain label], select
[Banding Reduction] to reduce
black lines or white lines when print-
ing.
On the [General] tab, select
[Advanced] from [Print Settings],
click [Advanced...], and then select
[Banding Reduction].
When you select this, printing speed
may decline.
When the paper type is set to other
than [Plain] or [Plain label], select
[Quality] to reduce black lines or
white lines when printing.
From the printer driver's [Print Set-
tings], set [Print Quality] to [Quality].
When you select this, printing
speed may decline.
Open the roll paper cover, and
load the roll paper again.
For details, see
Paper with Fanfold Paper" on page
66.
Place the stack of fanfold paper
straight at least 40 mm away from
the back of the printer.
For details, see
Paper with Roll Paper" on page
Chapter 3 Handling
Recovery method
174
"Replacing Roll
"Replacing Fanfold
76.
Image/
Illustra-
tion
No. 3
3
No. 3
No. 3
-
No. 3
141