Epson TM-C3500 Series Technical Reference Manual page 146

Trouble
Auto Fit Page is not
available
The print position is mis-
aligned
146
Description
For thermal label printers, the label
size is generally considered as
"printable area", however for TM-
C3400, it is considered as "label
size" - "margins" = printable area.
Therefore, TM-C3400 comes with
the Auto Fit Page function so that
the same paper layout can be
The Auto Fit Page func-
used even when the printable area
tion is available for TM-
is smaller.
C3400, but it is not
To be more precise, when [Auto Fit
available for TM-
Page] is enabled, the size including
C3500.
the margins is reduced to fit the
printable area.
For TM-C3500, enable [Borderless
Printing] to match the "label size"
and "printable area".
Enable [Borderless Printing] if you
want to use the same paper layout
as for the thermal label printer.
If the paper you are using differs
from the paper set in the [Media
Layout], the image may not be
printed at the correct position.
The paper you are
using differs from the Set Media Layout correctly.
paper set in the
For more information, see step 9 in
[Media Layout].
"Replacing Roll Paper with Fanfold
Paper" on page
"Replacing Fanfold Paper with Roll
Paper" on page
Recovery method
66, or step 10 in
76.
Image/
Illustra-
tion
-
-