Sfp+/Lan 1/2 Activity Leds; Sfp+/Lan 1/2 Heartbeat Leds - Supermicro SUPERO X10DRD-iTP User Manual

SFP+/LAN 1/2 Activity LEDs

The SFP+/LAN 1 Activity LED is located at LED3,
and SFP+/LAN 2 Activity LED is located at LED5
on the motherboard. When LED3 is blinking, SFP+/
LAN1 is active. When LED5 is blinking, SFP+/
LAN2 is active. See the table on the right for more
information.

SFP+/LAN 1/2 Heartbeat LEDs

The SFP+/LAN 1 Heartbeat LED is located at LED4,
and SFP+/LAN 2 Heartbeat LED is located at LED6
on the motherboard. When LED4 is blinking, SFP+/
LAN1 is working properly. When LED6 is blinking,
SFP+/LAN2 is working properly. See the table on
the right for more information.
Note: Refer to Page 2-20 for information on the rear UID LED (LED1).
BMC
AST2400
BIOS
PCH
CPU1
CLOSE 1st
LAN2
LAN1
SFP2
SFP1
VGA
JIPMB1
A
D
B
NIC CTRL
Intel 82599
X10DRD-LTP
REV:1.00
IPMI CODE
BIOS
LICENSE
SAN MAC
CLOSE 1st
OPEN 1st
2-37
SFP+/LAN 1 & 2 Activity
Color/State
LED3:
Green: Blinking
LED5:
Green: Blinking
SFP+/LAN 1 & 2 Heartbeat
Color/State
LED4:
Green: Blinking
LED6:
Green: Blinking
USB0/1
JUSBRJ45
COM1
USB2/3
IPMI_LAN
C
SP1
BAR CODE
MAC CODE
CPU2
OPEN 1st
JBAT1
Chapter 2: Installation
LEDs
Status
Definition
SFP+/LAN1:
Active
SFP+/LAN2:
Active
LEDs Status
Definition
SFP+/LAN1:
Normal
SFP+/LAN2:
Normal
A. LED3
B. LED4
C. LED5
D. LED6