Programming Flow
For the ePOS-Print API, programming is performed based on the following work flow:
❏
To create a text print document: (p.45)
❏
To create a graphic print document: (p.46)
❏
To create a page mode print document (p.47)
• ePOS‐Print supported TM printer checks the status of the TM printer to be used for printing
and then starts printing operation. (in firmware Ver.1.2 and later)
• A status event helps check the status of the TM printer. For details on the procedure, refer to
Reception of Status Event (p. 51). (in firmware Ver.1.2 and later)
42
Embedding of ePOS-Print API (p.43)
1.
Print Document Creation (p.44)
2.
Transmission of Print Document (p.48)
3.
Reception of Print Result (p.49)
4.