addFeedPosition method
Adds label/black mark paper feeding to the command buffer. (Supported in firmware Ver.2.1 and later)
• Control of label paper/black mark paper must be done in the standard mode.
• In the page mode, addFeedPosition method specification cannot be used.
Syntax
addFeedPosition(pos);
Parameter
pos :
( Required parameter, Object type : String)
Specifies the feed position.
Return value
ePOS-Print Builder Object
Exception
Parameter " ... " is invalid
84
Setting
FEED_PEELING
FEED_CUTTING
FEED_CURRENT_TOF
FEED_NEXT_TOF
Return value
Exception
Description
Feeds to the peeling position.
Feeds to the cutting position.
Feeds to the top of the current label.
Feeds to the top of the next label.
Object type
ePOS Builder
Object type
Error