Epson TM-T88V-i User Manual page 190

 Value of satus
Constant (status)
ASB_NO_RESPONSE
ASB_PRINT_SUCCESS
ASB_DRAWER_KICK
ASB_BATTERY_OFFLINE
ASB_OFF_LINE
ASB_COVER_OPEN
ASB_PAPER_FEED
ASB_WAIT_ON_LINE
ASB_PANEL_SWITCH
ASB_MECHANICAL_ERR
ASB_AUTOCUTTER_ERR
ASB_UNRECOVER_ERR
ASB_AUTORECOVER_ERR
ASB_RECEIPT_NEAR_END
ASB_RECEIPT_END
ASB_BUZZER
ASB_WAIT_REMOVE_LABEL
ASB_NO_LABEL
ASB_SPOOLER_IS_STOPPED
 Value of battery
0 is shown when the model doesn't have a battery installed.
Status of power
Value (battery)
0x30XX
0x31XX
Remaining battery
Value (battery)
0xXX36
0xXX35
0xXX34
0xXX33
0xXX32
0xXX31
0xXX30
190
No response from the TM printer
Printing is successfully completed
Status of the 3rd pin of the drawer kick-out connector = "H"
Off line status from remaining battery
(only for applicable devices) (in firmware Ver.2.2 and later)
Offline
The cover is open
Paper is being fed by a paper feed switch operation
Waiting to be brought back online
The paper feed switch is being pressed (ON)
A mechanical error occurred
An autocutter error occurred
An unrecoverable error occurred
An automatically recoverable error occurred
No paper in roll paper near end sensor
No paper in roll paper end sensor
A buzzer is on (only for applicable devices)
Waiting period for removal of label (only for applicable devices) 
(in firmware Ver.2.1 and later)
No paper in label peeling sensor (only for applicable devices)
(in firmware Ver.2.1 and later)
The spooler has stopped (Not used)
AC adapter is connected
AC adapter is not connected
Remaining battery 6
Remaining battery 5
Remaining battery 4
Remaining battery 3
Remaining battery 2
Remaining battery 1 (Near end)
Remaining battery 0 (Real end)
Decription
Description
Description