Addbarcode Method - Epson TM-T88V-i User Manual

addBarcode method

Adds barcode printing to the command buffer.
In page mode, a barcode is laid out in the current print position with the reference point being its
bottom left dot (except for HRI).
Syntax
addBarcode(data, type, hri, font, width, height);
Parameter
 data :
( Required parameter, Object type : String)
Specifies the barcode data as a string.
90
Barcode type
UPC-A
UPC-E
EAN13
JAN13
EAN8
JAN8
CODE39
ITF
Description
When an 11-digit number is specified, a check digit is
automatically added.
When a 12-digit number is specified, the 12th digit is pro-
cessed as a check digit but the check digit is not vali-
dated.
Specify 0 as the first digit.
Specify the manufacturer code in the digits 2 to 6.
Specify (right-align) the item code in the digits 7 to 11.
The number of item code digits varies depending on the
manufacturer code. Specify 0s in empty digits.
When an 11-digit number is specified, a check digit is
automatically added.
When a 12-digit number is specified, the 12th digit is pro-
cessed as a check digit but the check digit is not vali-
dated.
When an 12-digit number is specified, a check digit is
automatically added.
When a 13-digit number is specified, the 12th digit is pro-
cessed as a check digit but the check digit is not vali-
dated.
When a 7-digit number is specified, a check digit is auto-
matically added.
When an 8-digit number is specified, the 8th digit is pro-
cessed as a check digit but the check digit is not vali-
dated.
When the first character is *, the character is processed as
the start character. In other cases, a start character is
automatically added.
Start and stop codes are automatically added.
Check digits are not added or validated.