Loading Envelopes And Precautions; Setting The Paper Size And Paper Type For Each Paper Source - Epson 3801 User Manual

User's Guide
Related Information
"Paper Handling Precautions" on page 24
&
"Available Paper and Capacities" on page 24
&

Loading Envelopes and Precautions

Envelopes can only be loaded in the rear paper feed. Load envelopes short edge first at the center with the flap
facing down, and slide the edge guides to the edges of the envelopes.
❏ Fan and align the edges of the envelopes before loading. When the stacked envelopes are puffed up with air,
press them down to flatten them before loading.
❏ Do not use envelopes that are curled or folded. Using these envelopes causes paper jams and smears on the
printout.
❏ Do not use envelopes with adhesive surfaces on the flaps or window envelopes.
❏ Avoid using envelopes that are too thin, as they may curl during printing.
Related Information
"Available Paper and Capacities" on page 24
&
"Loading Paper in the Rear Paper Feed" on page 30
&
Setting the Paper Size and Paper Type for Each Paper
Source
After loading paper, set the paper size and paper type for each paper source on the control panel. Once these
settings have been made, when automatic paper source selection is enabled, paper is automatically fed from a
paper source that matches the paper size and type settings for the print job. You do not need to select the paper
source each time you print.
1. Press the button.
2. Select a paper source.
Loading Paper
33