Advertisement
Quick Links
A Communication Division of UIC Corporation
IC35516G
High Port Count Single Chip Gigabit Solution for Layer 2 switching,
Layer 3 IP Routing and L2-4 packet ltering
Choose from two design versions:
12 ports 10/100/1000BaseT with 4 ports auto-selectable
GBIC/1000BaseT Copper
12 ports GBIC for Fiber backbones with 4 ports auto-selectable
GBIC/1000BaseT Copper
Supports Layer 3 Routing
Discovery Protocol, RIP I/II, OSPF, including static route table
(insertion/deletion) and Layer 3 IGMP multicasting
Deploy multimedia services (voice, video, audio, telephony) throughout
your network with multi-service
and 256 multicast groups
Highest Level of IEEE 802.1p Priority Queues supported
port. This advanced QoS software option is ideal for sophisticated
Ethernet service, including multi-tenant unit (MTU) installations.
Multiple Management Options
Software Redundancy:
Jumbo Packet:
Security: Station move detection, Duplicate IP address
VLAN: 4000 virtual LANs supported with IEEE802.1Q tagging
Emergency backup, Redundant Power Supply
redundant power.
IntraCore
16-port Gigabit Managed Routing Switch
IC35516T
for IP with Router Standby Protocol, Router
technologies: IP multicast with IGMP
: SNMP, Telnet, RMON, console
Two banks for storing rmware
Will support frames up to 16384 bytes
®
35516
™
Layer 2/3/4
– 8 on each
provides optional
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Asante IC35516 IC35516G
Summary of Contents for Asante IC35516 IC35516G
- Page 1 A Communication Division of UIC Corporation IC35516G High Port Count Single Chip Gigabit Solution for Layer 2 switching, Layer 3 IP Routing and L2-4 packet ltering Choose from two design versions: 12 ports 10/100/1000BaseT with 4 ports auto-selectable GBIC/1000BaseT Copper 12 ports GBIC for Fiber backbones with 4 ports auto-selectable GBIC/1000BaseT Copper Supports Layer 3 Routing...
- Page 2 The IntraCore 35516 Layer 3 family of Gigabit Ethernet switches is Asanté’s high performance, flexible range of backbone router switches. Tailor this IntraCore® switch with hardware and software to precisely match your network needs—today and in the future. By using Layer 3 routing with the IntraCore® 35516, you can subnet a standard IP network into multiple subnets.
- Page 3 FEATURES Single-Chip: Forwarding rate of 24 million packets per second at full wire speed over all network interfaces in a unit Layer 2/3 Switch/Router: 32 Gbps switch fabric (per unit) minimizes blocking and latency Runs cooler and more reliably than older, multi-chip designs Extensible Platform: Choose from 2 popular Gigabit configurations with auto-selectable switching - 12 ports 10/100/1000BaseT and 4 dual function ports of GBIC/1000BaseT...
-
Page 4: Specifications
Firmware Configuration Configuration files uploading/downloading Image files downloading for updating firmware, TFTP Software updating: BOOT module, software redundancy. IP/UDP Helper: - BOOTP - DHCP - TFTP - DNS - IEN-116 - Time Server - NetBIOS Name server - NetBIOS Datagram Server - TACACS Server - RADIUS Server SPECIFICATIONS... -
Page 5: Ordering Information
ORDERING INFORMATION i r c IntraCore 35516-G 12-port GBIC and 4 dual function ports GBIC/1000BaseT copper. Layer 2/3/4 IntraCore 35516-T 12-port 10/100/1000BaseT and 4 dual function ports GBIC/1000T copper. Layer 2/3/4 *For international part numbers, please refer to ASD Marketing. **See GBIC datasheet and Asante’s price list for additional GBIC’s and GBIC price bundles. 47709 Fremont Blvd, Fremont, CA 94538 USA ·...
Need help?
Do you have a question about the IC35516 IC35516G and is the answer not in the manual?
Questions and answers