Mazda Radar Cruise Control - Mazda 6 Smart Start Manual

Mazda Radar Cruise Control

MAZDA RADAR CRUISE CONTROL (MRCC) SYSTEM (if equipped)
The MRCC system maintains vehicle speed and following distance using
a radar sensor to detect a vehicle ahead. The driver simply presets the
vehicle speed between 19 mph (30 km/h) and 90 mph (145 km/h) and the
system will maintain a safe following distance without having to turn the
cruise control off.
The system operates in two modes, Constant Speed and Headway Control modes:
Constant Speed Mode
When no vehicle is detected ahead,
the driver's set speed is maintained.
Setting the MRCC
When the ON switch is pushed, the
vehicle speed and the distance between
vehicles while in headway control can
be set. The MRCC indication is shown
in the display of the instrument cluster.
How to set the speed:
1 Adjust the vehicle to the desired speed using the
accelerator pedal.
2 Push the SET + or SET – switch. The set speed
and the inter-vehicle distance display filled with white
lines is displayed in the active driving display and the
MRCC indicator light (green) turns on simultaneously.
Travel Status
Display
17
When a vehicle is detected ahead,
a distance between your vehicle and
the vehicle ahead is maintained.
Cancel
Distance
Control
(Shorter
/Longer
During travel at
constant speed
Vehicle ahead display
MRCC Distance
between vehicle display
MRCC Set vehicle speed
Headway Control Mode
Reset
)
OFF ON
During travel under
headway control
Cruise
Control
(Set+/Set-)