Tire Pressure Monitoring System (Tpms) - Mazda 6 Smart Start Manual

Tires

TIRE PRESSURE MONITORING SYSTEM (TPMS)

For your safety, the Mazda6 is equipped with TPMS that detects low
tire pressure in one or more tires. If the tire pressure starts getting
low in one or more tires, the system alerts the driver by turning on a
light in the instrument cluster (pp. 33-34) and sounding an alarm.
What to do? Don't ignore the TPMS warning light. Stop and check your
tire pressure (when tires are cold) and inflate them to the proper pressure.
Properly inflated tires are safer, last longer, and increase fuel economy.
In the following cases, the TPMS must be "initialized" so the system can
operate normally.
• The tire pressure is adjusted (up or down) in one or more tires.
• A tire rotation is performed.
• Any tire or wheel is replaced.
• The vehicle's battery is disconnected, replaced or completely dead.
Initialization Process (TPMS Warning Light
1 Park the vehicle in a safe place and firmly apply the parking brake.
2 Let the tires cool, then adjust the tire pressure to the specified
pressure (See tire label located on the driver's
side door opening) on all four (4) tires.
3 Switch the ignition ON, but leave the vehicle parked.
4 Push and hold the TPMS "Set Switch"
(left side of dash) until the TPMS warning light
in the instrument cluster flashes twice and
a beep sound is heard once.
CAUTION: If the TPMS "Set Switch" is pushed without adjusting the tire
pressure, the system cannot detect the normal tire pressure. The TPMS
warning light may not turn on, even if the tire pressure is low, or it may turn on
if the tire pressure is normal.
NOTE:
Drastic changes in temperature or altitude may cause the TPMS warning
light to turn on.
www.MazdaUSA.com
is Illuminated)
6