Table of Contents
Advertisement
Using the SKM 9000
Switching the SKM 9000 on/off
To switch the SKM 9000 on:
Keep the
ON/OFF
B
pressed
Sennheiser logo appears on
the display panel 5.
The
ON/OFF
button
backlit in blue and the
selected standard display
(here:
"Frequency",
page 15) appears on the
display panel 5. The radio
microphone transmits an RF
signal and the transmission
mode display "HD"/"LR"
lights up constantly:
480.000
3:59
To switch the SKM 9000 off:
Keep the
ON/OFF
goes off.
Remove the accupack/battery pack when the radio microphone
will not be used for extended periods of time (see page 8).
To switch the SKM 9000
Press the
ON/OFF
shown.
"LOCK" appears on the display panel because the lock mode is
activated.
Press the
UP
button
"UNLOCK" appears on the display panel.
Press the
SET
The lock mode is temporarily
deactivated,
icon 5
flashes.
Within the next 2 seconds, press
the
ON/OFF
button
keep it pressed until the display panel goes off.
If you switch on the SKM 9000, the lock mode is activated again.
10 |
SKM 9000
button
until
the
B
is
see
B
button
off
with
the lock mode
button
0
or the
A.
button
the
lock
mode
B
and
pressed until the display panel
activated:
B
while the standard display is
DOWN
button
480.000
480.000
3:59
3:59
B
9.
Hide quick links:
Advertisement
Table of Contents
