Timer Recording Speed Setting - Magnavox VRA641AT99 Owner's Manual

40 Timer Recording Speed Setting

If a program is recording in SP and there is not enough tape to
record the entire program, the VCR automatically switches to SLP
to allow complete recording if TIMER REC SPEED is set to
AUTO. This feature is especially useful when you set a timer
recording for a program that is more than two hours long.
For example, when you record a program of 140 minutes in
length onto a 120-minute tape, the program is recorded in SP for
about 110 minutes and in SLP for about 30 minutes.
Approximately 110 minutes
SP
Follow the steps below to set TIMER REC SPEED to AUTO.
1
Press the VCR button, then press the MENU button.
SELECT , 9
CHOOSE >/OK
VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
2
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the FF :/OK button.
SELECT , 9
CHOOSE >/OK
ON SCREEN MODE ON
BLUE BACKGROUND ON
TIMER REC SPEED MANUAL
VIDEO STABILIZER OFF
AUDIO OUT HIFI
STEREO/SAP STEREO
TO END PUSH EXIT
3
Press the PLAY 8 or STOP 9 button to select TIMER
REC SPEED, then press the FF :/OK button so that
AUTO appears beside TIMER REC SPEED. (To turn off this
feature, press the FF :/OK button so that MANUAL appears
beside TIMER REC SPEED.)
SELECT , 9
CHOOSE >/OK
ON SCREEN MODE ON
BLUE BACKGROUND ON
TIMER REC SPEED AUTO
VIDEO STABILIZER OFF
AUDIO OUT HIFI
STEREO/SAP STEREO
TO END PUSH EXIT
4
Press the EXIT/STATUS button.
Approximately 30 minutes
SLP
1
CBL / DBS TV VCR
VCR/TV POWER EJECT
QUICK PROGRAMMING
+ +
1 2 3
START STOP DATE
- -
4 5 6
DBS DAILY WEEKLY
7 8 9
0
SPEED CLEAR
STILL/SLOW
- +
REW FF
PLAY
/OK
STOP
VOL CH
MENU
EXIT/STATUS
TIMER
SKIP SEARCH INDEX AUDIO/MUTE
SMARTPICTURE /OTR
REC REC
Helpful Hint
• Some distortion may appear on the
tape when the tape speed changes.
2-3
4