Table of Contents
Advertisement
44 Multi-Channel Television Sound System (cont'd)
To receive and record programs broadcast in second audio, follow steps 1-6. To receive and record a
program broadcast in stereo, make one of the connections shown, then follow steps 1-6.
If you have a Stereo and a Monitor TV,
use a video cable to connect the VCR's
VIDEO OUT Jack to the TV's VIDEO
IN Jack. Use audio cables to connect
the VCR's AUDIO OUT Jacks to the
Stereo's AUDIO IN Jacks.
1
Press the VCR button, then press the MENU button.
SELECT , 9
CHOOSE >/OK
VCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
2
Press the PLAY 8 or STOP 9 button to select VCR SET
UP, then press the FF :/OK button.
SELECT , 9
CHOOSE >/OK
ON SCREEN MODE
ON
BLUE BACKGROUND
ON
TIMER REC SPEED
MANUAL
VIDEO STABILIZER
OFF
AUDIO OUT
HIFI
STEREO/SAP
STEREO
TO END PUSH EXIT
3
Press the PLAY 8 or STOP 9 button to select
STEREO/SAP, then press the FF :/OK button to select
SAP (for a Second Audio Program) or STEREO,
whichever you prefer.
4
Press the EXIT/STATUS button.
5
Use the CH(annel) 8/9 button to select a channel to
record.
Press the EXIT/STATUS button to access the on-screen status
display and to make sure the program is being broadcast in stereo
or second audio.
6
Press the REC(ord)/OTR button to start recording.
IN
IN
OUT
OUT
ANT.IN
R
AUDIO
L
RF OUT
VIDEO
CH3 CH4
IN
OUT
OUT
ANT.IN
R
AUDIO
L
RF OUT
VIDEO
CH3 CH4
• If you want to connect the VCR to a
Stereo TV, follow these steps.
1) Connect the antenna or cable
signal to the VCR's ANT(enna) IN
Jack.
2) Use stereo audio cables to
connect the VCR's AUDIO OUT
Jacks to the TV's AUDIO IN Jacks.
3) Use a video cable to connect the
VCR's VIDEO OUT Jack to the TV's
VIDEO IN Jack.
• Make sure the TV and the Stereo (if
applicable) are in Line Input or
Auxiliary mode. Please refer to your
TV or Stereo owner's manual for
OR, if you have a single-speaker
TV, use an RF coaxial cable to
connect the VCR's RF OUT Jack to
the TV's ANTENNA IN Jack.
Helpful Hints
Advertisement
Table of Contents
