Setting Up The Vcr Plus+ Programming System - Magnavox VRA641AT99 Owner's Manual

32 Setting Up the VCR Plus+ Programming System

1
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR
Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers, and
since channel numbers differ from area to area, you must program the VCR with your local channel
information. To fill in the boxes, you will need 1) a cable channel list, if applicable (you can request one
from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your
TV guide or the TV listings of your local newspaper.
NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04 (the Cable
Box/DBS output channel) for every VCR Plus+ channel.
Channels Channels
Station Station
VCR PLUS+ CH. CABLE/TV CH. VCR PLUS+ CH. CABLE/TV CH.
Call Letters Call Letters