HP 8200i User Manual page 26

1-14
If you are installing your CD-Writer in an empty drive bay, skip to
step 17.
16. If you are replacing a CD-ROM, attach to your drive the wide, flat cable
that you previously unplugged from the CD-ROM drive. Most connectors
are keyed so that they only fit one way. If your connector is not keyed to
fit only one way, make sure the cable's colored edge is aligned with PIN-1,
which is clearly marked on the CD-Writer Plus drive.
CAUTION: Make sure that you are attaching the cable correctly! You must
locate PIN-1 on each connector and attach the cable so that the edge with the
color stripe is aligned with PIN-1. If the cable is attached incorrectly, your
computer may not boot up.
Installing a CD-Writer
Colored stripe on
the data cable
PIN-1
The cable's colored edge is aligned
with PIN-1 on the CD-Writer Plus
drive.