HP 8200i User Manual page 16

1-4
Getting an Install Recommendation
CD-Writer Plus' installation program will analyze your computer and
make a recommendation about connecting the CD-Writer Plus hardware.
This recommendation is specific to your computer and is the first step in
successfully installing CD-Writer Plus.
1. Go back to the main menu and click on the Install CD-Writer Plus icon.
2. Follow the instructions on the screen.
3. When the CD-Writer Plus Install Recommendation screen appears, click
Print. Or, if you don't have a printer, copy the information by hand.
You'll need this information in the next section.
Installing the Hardware
CAUTION: The discharge of static electricity can damage electronic circuitry.
You can avoid static discharge by touching a grounded metal object such as
your computer's case before and during installation of hardware inside your
computer or by wearing a grounding strap connected to ground.
1. Remove the CD labeled Software Disc 1 from your CD-ROM drive.
2. After getting the Install Recommendation (see the previous section) you
will be prompted to shut down Windows. Click the Shutdown button
and wait until it is safe to turn off your computer. Proceed to turn OFF
your computer, monitor, and other devices.
3. Unplug the power cords from the wall outlet or from the power strip, if
you use one.
Installing a CD-Writer
Install CD-Writer Plus icon