Altering the time of day
The time of day can only be changed
when the function selector is at .
Select .
Use the rotary selector to move
the triangle until it appears
under .
Confirm with OK.
The triangle will flash under .
Use the rotary selector to enter the
time of day.
Confirm with OK.
The time of day is now saved.
In the event of a power cut the time of
day is saved for approx. 200 hours. If
power is restored within this time the
current time of day is displayed.
After a longer power cut, the time of
day needs to be re-entered.
Settings
33