Oven Controls; Safety Features; System Lock; Cooling Fan - Miele H6100BM Operating And Installation Instructions

Oven controls

The oven controls are used to operate
the various cooking functions for
baking, roasting and grilling and
heating.
They are also used for
– the time of day display,
– a minute minder,
– a timer to automatically switch
cooking programmes on and off,
– settings that can be customised.

Safety features

System lock 
The system lock prevents the oven from
being used unintentionally (see "System
lock ").
The system lock will remain activated
even after an interruption to the power
supply.

Cooling fan

The cooling fan will come on
automatically when a cooking
programme is started. The cooling fan
mixes hot air from the oven cavity with
cool room air before venting it out into
the kitchen through vents located
between the appliance door and the
control panel.
The cooling fan will continue to run for
a while after a cooking process to
prevent moisture building up in the
oven, on the control panel or on the
oven housing unit. It will switch itself off
automatically after a while.

Safety switch-off

A function without microwave can be
started without selecting a cooking
duration. To prevent over-use and the
consequent danger of fire, the oven will
switch itself off automatically after a
certain length of time. This can be
between 1 hour and 12 hours
depending on the function and
temperature chosen.
If a combination programme is
followed in quick succession by
another programme using microwave
power, the magnetron (which produces
the microwaves) cannot be switched on
again until approx. 10 seconds have
elapsed. Therefore wait a short while
before starting the second process.
Features
29