Turning Power On/Off; Turning On The Main Power - Sharp PN-L703A Setup Manual

Caution
• Turn on the monitor first before turning on the computer or
playback device.

Turning on the main power

Main power switch
The monitor enters the Power off (Standby mode) state.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
• Before switching off the main power switch, always put the
monitor in the Power off (Standby mode) state. (Hold down
the POWER button at least 10 seconds.)

Turning Power On/Off

Turning power on
Press the POWER button to turn the power ON/OFF.
Green lit
Orange lit
Alternately flashes green and
orange
Green flashing
• The WHITEBOARD appears.
(Factory setting. Can be changed in INPUT SELECT in the
SETUP menu.)
POWER button / Power LED
Status Status of the monitor
Power on
Power off (Standby mode)
Power off
(whiteboard standby mode)
Input signal waiting mode
7
E