HP StorageWorks 2000 Series Reference Manual page 75

4. Click Expand Virtual Disk.
Expansion begins and the percentage completed is shown. You can perform other
functions during the expansion. You can view the status of the expansion on the
Vdisk Utility Progress page or on any page that shows virtual disk icons.
To check the status of any running virtual disk utilities:
Select Manage > Virtual Disk Config > Vdisk Utility Progress.
For each virtual disk, the virtual disk panel shows a status icon; the name, RAID
level, size, number of disk drives, and number of volumes; and utility status, if any.
For each virtual disk where a utility is running, a Utility Running For Virtual Disk
panel specifies its status.
To stop the Initialize or Verify utility, go to the Abort A Vdisk Utility page.
To stop background scrub of virtual disks, go to the General Config > System
Configuration page. You cannot stop the Expand or Reconstruct utility unless you
delete the virtual disk.
The quarantine icon
quarantined because not all of its drives were detected after a restart or rescan.
Quarantine isolates the virtual disk from host access, and prevents the storage
system from making the virtual disk critical and starting reconstruction when drives
are "missing" for these reasons:
Slow to spin up after system power-up
Not properly seated in their slots
In an powered-off enclosure
Inserted from a different system and contains old metadata
The virtual disk can be fully recovered if the missing drives can be restored. Make
sure that no drives have been inadvertently removed and that no cables have been
unplugged. Sometimes not all drives in the virtual disk power up. Check that all
enclosures have rebooted after a power failure. If these problems are found and then
fixed, the virtual disk recovers and no data is lost.
indicates that a previously fault-tolerant virtual disk is