HP StorageWorks 2000 Series Reference Manual page 298

298 Warning
299 Informational
300 Informational
301 Informational
302 Informational
303 Informational
304 Informational
305 Informational
306 Informational
The controller's real-time clock
(RTC) settings might be invalid after
an unexpected power loss.
The controller's real-time clock
(RTC) settings were recovered after
an unexpected power loss.
CPU frequency has been adjusted to
high.
CPU frequency has been adjusted to
low.
DDR memory clock has been
adjusted to high.
DDR memory clock has been
adjusted to low.
The controller has detected I
that may have been fully recovered.
This event is logged as informational
to note an existence of previous I
errors.
A serial number in Storage Controller
flash memory is invalid. The valid
serial number will be recovered
automatically.
An old serial number in Storage
Controller flash memory has been
updated to a new serial number.
Check the system date and time. If
either is incorrect, set them to the
correct date and time.
2
C errors
2
C