HP StorageWorks 2000 Series Reference Manual page 296

249 Informational
250 Warning
252 Informational
256 Informational
257 Informational
258 Informational
259 Informational
260 Informational
261 Informational
262 Informational
263 Warning
264 Informational
A valid license has been installed for
the specified feature. This event is
logged for each feature license
installed.
A license could not be installed
(license is invalid).
Snapshot write data on the specified
master volume has been deleted.
The specified snapshot has been
created but not committed. A commit
action is required before the snapshot
can be used.
The specified snapshot has been
created and committed.
The specified snapshot has been
committed and is ready for use.
Inband CAPI commands have been
disabled.
Inband CAPI commands have been
enabled.
Inband SES commands have been
disabled.
Inband SES commands have been
enabled.
The specified drive spare is missing.
It was either removed or is not
responding.
The link speed of the port bypass
circuit and interconnect mode has
been set to the default.
Check license parameters against
what is allowed for the platform
and recreate the license using valid
parameters, then reinstall.
Review the readme file that came
with the license.
Replace the specified drive.