HP StorageWorks 2000 Series Reference Manual page 294

233 Warning
234 Critical
235 Informational
236 Informational
237 Informational
238 Warning
239 Warning
240 Warning
The specified drive type is invalid
and not allowed in the current
configuration.
The specified snap pool is
unrecoverable and can therefore no
longer be used.
A non-disk SCSI device, such as an
EMP or partner controller, has
reported a check condition.
A special shutdown operation has
started.
A firmware update has started and is
in progress.
An attempt to write license data
failed due to an invalid license.
A timeout has occurred while
flushing the compact flash.
A failure has occurred while flushing
the compact flash.
One or more drives are not allowed
for this platform. They have been
removed from the configuration.
(Some platforms are SAS- or
SATA-only). Replace the
disallowed drives with ones that
are supported.
All the snapshots associated with
this snap pool are invalid and the
user may want to delete them.
However, the data on the master
volume can be recovered by
converting it to a standard volume.
Check the license for what is
allowed for the platform, make
corrections as appropriate, and
reinstall. If the license is invalid,
the write will fail.
Cycle power and restart the system.
If the error persists, save the log
files and contact a service
technician.
Cycle power and restart the system.
If the error persists, save the log
files and contact a service
technician.