Operating Modes; Sound Active Mode; Auto Run Mode - ADJ Mega GO Par64 PLUS User Instructions

Mega GO Par64 PLUS
System Menu: The display will lock after 30 seconds, press
the MODE button for 3 seconds to unlock.
LED Display On/Off:
To set the LED display to turn off after 10 seconds, press the MODE
button until "don" is displayed, press the UP button to display "doff".
Now the display will disappear after 10s. Press any button to turn
the display on again. Be advised though that the display will turn off
automatically after 10 seconds.
To set the display press the MODE button until "dXX" is displayed.
Use the UP or DOWN buttons to select either:
"don" = LED display on at all times.
"doFF" = LED display shuts off after 10 seconds.
LED Display Inversion:
Follow these instructions to flip the display 180° so that the display
can be read upside down.
1. Plug the fixture in and press the MODE button until "dXX" is dis-
played. "XX" represents either "on" or "oFF".
2. Press the SET UP button until "Stnd" is displayed.
3. Press the UP or DOWN buttons to reverse the display 180°.

Operating Modes:

The Mega GO Par64 PLUS has five operating modes:
• RGB+UV Dimmer Mode - Choose one of the four colors to remain
static or adjust the intensity of each color to make your desired
color.
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs. There are 16 sound active modes.
• Auto Run Mode - In Auto Run mode, you can choose 1 of 16
color change modes, 1 of 16 color fade modes, or a combo color
change & fade mode.
• Static Color Mode - There are 64 colors to choose from.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller.
ADJ Products, LLC - www.adj.com - Mega GO Par64 PLUS User Manual Page 10
Operating Instructions Mega GO Par64 PLUS
RGB+UV Dimmer Mode:
1. Plug the fixture in and press the MODE button until:
2. When "r.XXX" is displayed you are in Red dimming mode. Press
the UP and DOWN buttons to adjust intensity.
3. When "G.XXX" is displayed you are in Green dimming mode.
Press the UP and DOWN buttons to adjust intensity.
4. When "b.XXX" is displayed you are in Blue dimming mode. Press
the UP and DOWN buttons to adjust intensity.
5. When "u.XXX" is displayed you are in UV dimming mode. Press
the UP and DOWN buttons to adjust intensity.
6. After you have adjusted the RGB & UV colors to make your
desired color you can then activate strobing by pressing the SET
UP button to enter the Flash (strobe) mode.
7. "FS.XX" will be displayed, this is Flash mode. The Flash can be
adjusted between "FS.00" (flash off) to "FS.15" (fastest flash).

Sound Active Mode:

In this mode the Mega GO Par64 PLUS will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until "SoXX" is dis-
played. "XX" represents the current sound active mode (1-16).
2. Use the UP or DOWN buttons to find your desired sound active
mode.
3. Press the SET UP button to enter sound sensitivity adjustment.
"SJ-X" will be displayed. Use the UP or DOWN buttons to adjust
the sensitivity. "SJ-1" is the lowest sensitivity, "SJ-8" is the high-
est.

Auto Run Mode:

There are 3 types of Auto Run Modes to choose from; Color Fade,
Color Change, and both modes running together. The running speed
is adjustable in all 3 modes.
1. Plug the fixture in and press the MODE button until either "AFXX",
"AJXX", or "A-JF" is displayed.
• AFXX = Color Fade mode, there are 16 Color Fade modes to
choose from. Use the UP or DOWN buttons to scroll through the
different Auto Fade modes.
• AJXX = Color Change mode, there are 16 Color Change modes to
ADJ Products, LLC - www.adj.com - Mega GO Par64 PLUS User Manual Page 11
Operating Instructions