Operating Modes; Sound Active Mode; Auto Mode; Dmx Mode - ADJ P64 LED Plus User Instructions

Table of Contents

Advertisement

P64 LED Plus
REMOTE
INPUT
OUTPUT
CONTROL
XLR Male Socket
XLR Female Socket
INPUT
2 Cold
2 Cold
3 Hot
Figure 3
POWER
Special Note: Line Termination.
used, you may need to use a terminator on the last unit to avoid erratic
nected between pins 2 and 3 of a male XLR connector (DATA + and
DATA -). This unit is inserted in the female XLR connector of the last
unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic
behavior.
Termination reduces signal errors and
avoids signal transmission problems
1
DMX512 IN
3
and interference. It is always advisable
3-PIN XLR
2
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and PIN 3 (DMX +) of the last fixture.
5-Pin XLR DMX Connectors.
dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,
these adaptors are readily available at most electric stores. The chart
below details a proper cable conversion.
3-Pin XLR to 5-Pin XLR Conversion
Conductor
3-Pin XLR Female (Out)
Ground/Shield
Data Compliment (- signal)
Data True (+ signal)
Not Used
Not Used
American DJ Supply
- www.americandj.com - P64 LED Plus Instruction Manual Page 7
©
®
REMOTE
INPUT
OUTPUT
SOUND
CONTROL
INPUT
3 Hot
POWER
When longer runs of cable are
Figure 4
Some manufactures use 5-pin DMX-
5-Pin XLR Male (In)
Pin 2
Pin 2
Pin 3
Pin 3
Do Not Use
Do Not Use
Set Up
P64 LED Plus

Operating Modes:

You can use the P64 LED Plus in four ways:
• Sound-Active mode - The unit will react to sound, chasing through
the built in programs.
• Auto Mode - The unit will automatically chase through the different
colors.
• RGB Mode - Choose a single color or colors to stay static.
• DMX control mode - This function will allow you to control each
-
as the Elation

Sound Active Mode:

In this mode the P64 LED Plus will react to sound, and chase through
the different colors.

Auto Mode:

postion.
-
RGB Mode:
postion.

DMX Mode:

Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs. This
American DJ Supply
©
Operating Instructions
Show Designer™.
®
- www.americandj.com - P64 LED Plus Instruction Manual Page 8
®
controller such as

Advertisement

Table of Contents
loading

Table of Contents