Technical Specifications; System Specification - Shure IS 6132 User Manual

DCS 6000 Digital Conference System
Refer to Setup section for information in how to setup the system using the above menus.

Technical Specifications

System Specification

Digital Section
Sound quality 20 bit
frequency.
Number of incoming channels ............. 32 (31 + floor)
Number of outgoing channels (interpreted) ............ 31
Analog Section
Microphone input type .......... DIS GM 61xx series only
Headphone output level: ................................ 1,5 V
Min. headphone impedance: ............. 4 ohm – 1 kohm
External loudspeaker output level (balanced): max. 2,8
V
Min. loudspeaker amp. input impedance:........ 2 kohm
Frequency response ................................. 125-15kHz
Signal to noise ratio: .................................>85 dBA
Total harmonic distortion: ........................... < 0.1%
General
Power requirement ................................. 24-48 V DC
Power consumption (excl. LS6032P) .. 2,5W maximum
audio @ 32 kHz sampling
Power supplied from ..... CU 61xx / EX 6010 / PS 6000
Temperature to guarantee specified performance
............. 5 Deg C. to 40 Deg C. (10 to 80% humidity)
Storage temperature
.......... -20 Deg C. to 60 Deg C. (10 to 80% humidity)
Weight ......................................................... 1,0 kg
Dimensions (W x H x D) .............. 235 x 73 x 115 mm
Connectors
DCS LAN loop through ......................... 2 pieces RJ45
Microphone input ........................ XLR3 female socket
Headphone connectors ..... 2 pieces mini jack 3.5 mm
........................................ 1 piece standard jack ¼"
Headset connector .......................... 8 pin DIN socket
LS 6032P Loudspeaker Unit socket ...................... D9S
Specifications are subject to change without
notice.
16
User Manual
without knobs and microphone