Editing setting.ini file
The following is an example of specifying a value in a setting.ini file. To restore from a settings
file, save the file into the folder that contains the setting.ini file, and specify the name of the
settings file in the setting.ini file. Simply doing this will restore the settings from the settings file.
Edit the contents to match your settings.
[Restore]
AppliedLocalFile = userAppSnapshot_0101.dhc
Section name
Parameter
Restore
AppliedLocalFi
le
Restore Settings
Designate the method for restoring settings by using the same procedure as for normal Easy
Setup.
For detail, refer to
"Flow of the Easy Setup" on page
Chapter 4 Restore the TMNet WebConfig
Description
Valid value
Designates the back-up file to be applied.
Designates the file in the same folder as this file (setting.ini).
Valid file name with the "dhc" extension.
27.
4
35