[Shutdown]
PowerButton = Enable
ePOSDevice = Enable
RequirePassword = Enable
[SSL]
UseSSL = Enable
PrivateKeyFile = server.key
CertificateFile = server.crt
CertificateChainFile = chain.cer
Section name
General
WiredNetwork
14
Parameter
Administrator
Designates the administrator name displayed on the
WebConfig [Admin information] page.
Within 255 alphanumeric characters.
Location
Designates the installation location displayed on the
WebConfig [Admin information] page.
Within 255 alphanumeric characters.
Delete this item if you are not using wired LAN.
IPAddressSetting
Designates the method for setting the IP address.
Method
"Auto" / "Manual"
IPAddress
Designates the IP address.
This must be set if the value for IPAddressSettingMethod is
"Manual".
This is ignored if the value for IPAddressSettingMethod is
"Auto".
Format of [numerical value 1 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 254]
The following address(es) cannot be used.
127.0.0.1
224.0.0.0 to 239.255.255.255
240.0.0.0 to 255.255.255.255
Settings when shutting down the prod-
uct from the ePOS-Device
Settings when using the SSL
Description
Valid value