Epson TM-T88V-DT Easy Setup Manual page 25

Section name Parameter
Networ kPrinter- SubnetMask
%X%
Gateway
NetworkMode
SSID
AdhocChannel
Communication-
Standard
Authentication-
Method
Description
Valid value
Designates the subnet mask.
 If the value for "IPAddressSettingMethod" is "Manual", this
must be set.
 If the value for "IPAddressSettingMethod" is "Auto", this is
ignored.
 Format of [numerical value 0 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 255]
 The following address(es) cannot be used.
0.0.0.0
127.0.0.1
255.255.255.255
255.0.255.0
Designates the default gateway.
 This is ignored if the value for IPAddressSettingMethod is
"Auto".
 Format of [numerical value 0 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 255]
 The following address(es) cannot be used.
127.0.0.1
Designates the operation mode for wireless LAN.
"Adhoc" / "Infrastructure"
Designates the SSID.
1 to 32 alphanumeric characters and symbols (excluding
spaces)
Designates the adhoc channel used when the wireless LAN
operation mode is "Adhoc".
If "Infrastructure" is used for the wireless LAN operation mode
designates "1".
"1" to "11"
Designates the communication standard for wireless LAN.
"802.11b" / "802.11b/g/n" / "802.11b/g/n"
Designates the authentication method.
 If the value for "NetworkMode" is "Adhoc", designate
"OpenSystem" or "SharedKey".
 If the value for "NetworkMode" is "Infrastructure", desig-
nate "OpenSystem", "SharedKey", "WPA", "WPA2",
"WPAPSK", or "WPA2PSK".
"OpenSystem" / "SharedKey" / "WPA" / "WPA2" / "WPAPSK"
/ "WPA2PSK"
Chapter 2 Preparing the setting file
2
25