Canon Vixia HF R10 Instruction Manual page 139

Menu item
/
[Initialize
[Initialize
[Photo Numbering]
[Firmware]
[Reset All]
[Eye-Fi Communication]
1
Option not available when the camcorder is connected to an HDTV using an HDMI
cable.
2
Option available only from the original movies index screen.
[Notification Sounds]:
ing on the camcorder, the self-timer countdown, etc.
[Power Saving Mode]:
powered by a battery pack, it will automatically shut off if left without any
operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto Power
Off] will appear.
• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start] setting.
[Quick Start]:
when you close the LCD panel in a recording mode and the length of time
after which the camcorder will end the standby mode and shut off auto-
matically.
[Control for HDMI]:
trol) function. When you connect the camcorder to an HDTV compatible
with HDMI-CEC using an HDMI cable, you can control the camcorder's
playback using the remote control of the TV.
• If set to [
HDTV using an HDMI cable, the video input on the TV will automatically
be set to the camcorder's video input. Then, you can use the up/down/
left/right buttons and the OK or SET button on the TV's remote control
to play back your recordings.
Downloaded From VideoCamera-Manual.com Manuals
/ [Mem. Card]
]
[Quick Initialization],
]
[Complete Initialization]
[
–
[No], [Yes]
[
A beep will accompany some operations like turn-
In order to save power when the camcorder is
Select whether to activate the Quick Start function (
Activates the HDMI-CEC (Consumer Electronics Con-
On], when the camcorder is connected to a compatible
Setting options
/
[Built-in Mem.],
Reset], [ Continuous]
Automatic], [
– –
Off]
Additional Information
2
38
–
–
–
128
43)
139