Canon Vixia HF R10 Instruction Manual page 120

2 Open the [For DVD (SD-VIDEO)] index screen on the memory card.
• Open the original movies index screen on the memory card, press
INDEX SEL.
3 Choose whether to add to the disc all the scenes or only scenes
that have not been previously added to a disc.
FUNC.
[All Scenes] or [Remaining Scenes]
4 Connect the camcorder to the DW-100 DVD Burner and create the
disc.
The procedure is the same as that for burning AVCHD discs (
Options
[All Scenes]
[Remaining Scenes]
previously added to a disc.
IMPORTANT
• While the camcorder is connected to the DVD burner, do not open the
memory card slot cover and do not remove the memory card.
• Observe the following precautions while the ACCESS indicator on the
camcorder is on or flashing. Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source or turn off the camcorder or the
DVD burner.
- Do not change the camcorder's operating mode.
NOTES
• When the camcorder contains a large number of scenes to be saved on
discs, it may take a long time for the connection to the DVD burner to
be completed. For best performance, we recommend limiting the num-
ber of scenes to be saved to 500 or fewer scenes. (With 500 scenes, it
will take approximately 3 minutes to complete the connection.)
Downloaded From VideoCamera-Manual.com Manuals
120
External Connections
then select [For DVD (SD-VIDEO)].
[ Menu]
Add all the scenes to the disc(s).
Add only those scenes that have not been
[Add Recordings to Disc]
FUNC.
114).