Canon Vixia HF R10 Instruction Manual page 82

Capturing Video Snapshot Scenes from a Movie
Capture a series of video snapshot scenes from a movie you have pre-
viously recorded.
Operating modes:
1 Play back the movie containing the scene you want to capture.
START/STOP
2 Press
• The camcorder captures a video snapshot scene (the blue frame
serves as a visual progress bar) and then automatically changes to
playback pause mode.
• You can change the length of video snapshot scenes with the
[Video Snapshot Length] setting.
• When the camcorder finishes capturing, the screen will momentarily
turn black as if a camera shutter had released.
NOTES
• A video snapshot scene can be captured only during playback; it can-
not be captured during playback pause mode.
• /
memory that contains the movie.
• Video snapshot scenes cannot be captured from any of the following
types of movies.
- Movies shorter than 1 second
- Scenes that were edited using the software on the supplied software
ImageMixer 3 SE and were then written back to the memory.
• When the source scene is itself a video snapshot scene, you may not
be able to capture a video snapshot scene depending on the length of
the source scene and the length currently selected for video snapshot
scenes.
• When you start capturing a video snapshot scene less than 1 second
from the end of the scene, the video snapshot scene will be captured
starting from the beginning of the following scene.
• During the playback of video snapshot scenes captured from a previ-
ously recorded movie, you may notice some anomalies in the picture/
sound at the point where the playback switches to a new scene.
Downloaded From VideoCamera-Manual.com Manuals
82
Video
at the point you want to capture.
The captured video snapshot scene is saved to the same