Advertisement
hints
l
To avoid splashing place the
frother/foaming tool in the
food to be processed before
switching on. Always ensure
that the bottom of the
frother/foaming tool is fully
submersed in the ingredients
whilst processing.
l
Always add the liquid ingredients
first.
l
Always mash fruit to a smooth puree
before adding.
l
If using syrups and powder mixes
add them just before mixing to
prevent them from sinking to the
bottom.
l
For best results, all liquid ingredients
should be as cold as possible.
l
Milk drinks will taste better if the milk
is ice cold. The colder the milk, the
thicker and more frothy the drink.
Skimmed milk will produce a frothier
drink than semi skimmed or full fat
milk.
l
Never try to mix frozen fruit or crush
ice.
l
Break up large lumps of ice cream
before frothing.
D
to use the chopper (if
supplied)
l
You can chop meat, vegetables,
herbs, bread, biscuits and nuts.
l
Do not chop hard foods such as
coffee beans, ice cubes, spices or
chocolate - you will damage the
blade.
1 Remove any bones and cut food
into 1-2cm (
⁄
1
2
2 Fit the rubber ring base
bottom of the chopper bowl. (This
stops the bowl sliding on the
worktop.)
3 Fit the chopper blade over the pin in
3
the bowl
.
4 Add your food.
5 Fit the chopper cover, turn and lock
4
.
6 Fit the power handle to the chopper
5
cover
- turn clockwise to lock.
7 Plug in. Hold the bowl steady. Then
press the Turbo button. Alternatively
press the Turbo button in short
bursts to achieve a pulsing action.
8 After use, unplug and dismantle.
-1") cubes.
bt
on the
E
Metal Masherpro™ (if
supplied)
important
l
Never use the masher in a saucepan
over direct heat. Always remove the
saucepan from the heat and allow to
cool slightly.
l
Do not tap the masher on the side of
the cooking vessel during or after
mashing. Use a spatula to scrape
excess food away.
l
For best results when mashing never
fill a saucepan etc., more than half
full with food.
1 Cook hard vegetables and fruit and
drain first before mashing.
2 Fit the masher collar to the masher
shaft by turning in a clockwise
direction until it locks in position
3 Fit either the coarse or fine screen to
the masher shaft – turn clockwise to
7
lock
.
4 Turn the masher upside down and fit
the paddle over the central hub and
turn anti-clockwise to secure
(If the collar is not fitted then
the paddle will not secure in
place).
5 Fit the power handle to the masher
assembly - turn clockwise to lock.
6 Plug in.
7 Place the masher in the saucepan or
bowl etc.
Select a low speed on the variable
control and then press the ON button
(refer to recommended usage chart).
l
Move the masher in an up and down
movement throughout the mix until
the desired result is achieved.
Increase the speed if required.
8 After use release the ON button and
unplug.
9 Turn the power handle anticlockwise
and remove the masher assembly.
10 Remove the paddle from the masher
by turning clockwise.
11 Remove the screen by turning anti-
9
clockwise
12 Unscrew the collar from the masher
shaft.
optional attachment (not
supplied in pack)
Mini chopper - refer to "service and
customer care" section to order.
7
8
and then lift off.
6
.
.
Advertisement
