Advertisement
to use the hand blender
You can blend soups, sauces, milk
shakes, mayonnaise and baby food
etc.
for beaker blending (if beaker
supplied)
Fit the rubber ring base
bottom of the beaker. (This stops the
beaker sliding on the worktop).
Do not fill the beaker more than
full.
After blending you can fit the lid
to the top of the beaker.
Note
If no beaker is supplied in your pack,
select a suitably sized container. We
would recommend a tall, straight
sided vessel with a diameter slightly
larger than the foot of the hand
blender to allow movement of the
ingredients but tall enough to
prevent splashing.
for saucepan blending
For safest use it is recommended to
take the pan off the heat and let hot
liquids cool to room temperature
before blending.
Use the soup XL PRO (if supplied) to
quickly process soups etc., directly
in the saucepan. Alternatively use
the hand blender.
Do not use the soup blender
to process uncooked
vegetables.
1 Remove the blade cover
from the end of the blender
shaft/soup XL PRO.
2 Fit the power handle inside the
blender shaft
to lock.
3 Plug in.
4 Place the food into the beaker or a
similar container, then holding the
beaker steady:
Select the required speed using the
variable speed control then press the
ON button.
Select a low speed for slower
blending and to minimise splashing
and a higher speed or Turbo for
faster blending (refer to
recommended usage chart).
9
on the
⁄
2
3
7
bl
or
and turn clockwise
To avoid splashing, place the
blade in the food before
switching on.
Do not let liquid get above the join
between the power handle and
blender shaft.
Move the blade through the food
and use a mashing or stirring action
to incorporate the mixture.
Your hand blender is not
suitable for ice crushing.
If your blender gets blocked, unplug
before clearing.
5 After use release the ON or Turbo
button. Unplug and turn the power
handle anticlockwise to remove the
blender shaft from the power handle.
B
to use the whisk
You can whip light ingredients such
as egg whites; cream and instant
desserts.
Do not whisk heavier mixtures such
as fat and sugar - you will damage
the whisk.
1 Push the wire whisk into the whisk
2
collar
.
2 Fit the power handle to the whisk
collar, turn clockwise to lock.
3 Place your food in a bowl.
4 Plug in and press the ON button.
To whisk on a faster speed, select a
higher speed or press the Turbo
button. Move the whisk clockwise.
To reduce splashing, select a low
speed then press the ON button.
Do not let liquid get above the whisk
wires.
5 After use release the ON or Turbo
button, unplug and dismantle.
C
to use frother/foaming tool
(if supplied)
Never add ingredients whilst the
appliance is operating.
Take care when blending hot liquids,
do not process more than 300mls in
the beaker.
Do not process more than 400mls of
cold milk in the beaker as it may
overflow as it froths and thickens.
1 Fit the frother/foaming tool shaft to
the power handle. Turn the power
handle clockwise to lock.
2 Start mixing on a low speed and
increase the speed if required.
6
Advertisement
