JVC GY-HM650U Instructions Manual page 99

ALC Limit
For setting the maximum gain value of "ALC",
which electrically boosts the sensitivity level
according to the brightness automatically.
[Setting Values: 24dB, R18dB, 12dB, 6dB]
Auto Iris Limit (OPEN)
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F5.6, F4, F2.8, F2, RF1.6]
Auto Iris Limit (CLOSE)
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F11, RF8, F5.6]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Smooth Trans
For setting the shock reduction function, which
slows down the sudden change when switching
with the [GAIN] or [WHT BAL] selection switch.
[Setting Values: Fast, Middle, Slow, ROff]
Memo :
However, this function is disabled when the
0
[FULL AUTO] switch is set to "ON", or when
switching the gain selection switch that was set
to "ALC".
GAIN L/GAIN M/GAIN H
For setting the gain value of each position on the
[GAIN] selection switch.
This is fixed at "ALC" when the [FULL AUTO] switch
is set to "ON".
[Setting Values: 24dB, 21dB, 18dB, 15dB, 12dB,
9dB, 6dB, 3dB, 0dB, -3dB, -6dB]
(Default values GAIN L: 0dB, GAIN M: 6dB, GAIN
H: 12dB)
Memo :
When [Shooting Mode] is set to "Standard",
0
"-3dB" and "-6dB" cannot be selected.
(A P104 [ Shooting Mode ] )
AE LEVEL SW
For specifying the operation of the cross-shaped
button (HI) on the right side.
AE LEVEL/VFR:
0
Sets the number of frames during Variable
Frame Rec, and operates as the AE level setting
button in other cases.
(A P84 [Variable Frame Rec] )
AE Level:
0
Operates as the AE level setting button at all
times.
Disable:
0
Disables the button.
[Setting Values: AE LEVEL/VFR, RAE Level,
Disable]
Handle Zoom Speed
This function allows you to set the zoom speed of
the zoom lever at the handle when the [ZOOM FIX/
VAR/OFF] switch is set to "FIX".
[Setting Values: 1 to 8 (R 5)]
AF Speed
For setting the AF operation speed.
[Setting Values: Fast, RMiddle, Slow]
AF Assist
For setting whether to shift the auto focus point
when the focus ring is turned during Auto Focus
(AF).
Area:
0
This option allows you to shift the auto focus
point to the left, center, right, or near and far
directions by turning the focus ring during AF.
Selecting this option displays the
the area.
Far/Near:
0
This option allows you to shift the auto focus
point to near and far directions by turning the
focus ring during AF.
[Setting Values: Area, Far/Near, ROff]
(A P50 [AF Assist Function] )
Memo :
This setting is effective only when the [FOCUS]
0
switch is set to "AUTO".
The manual focus adjustment mode is
0
temporarily activated by turning the focus ring in
the AF mode. If the focus ring is not operated for
a certain time, the camera recorder returns to the
AF mode.
User Switch Set...
For specifying user button related settings.
(A P100 [User Switch Set Item] )
icon in
99