JVC GY-HM650U Instructions Manual page 144

Clamp Filter
(supplied)
Wire Clamp
(supplied)
AV input
.
* Select the output signal in [A/V Set] B [HDMI/SDI Out].
(A P111 [ HDMI/SDI Out ] )
* When [Record Format] B [System] is set to "SD",
only SD-SDI signals are output.
(A P116 [ System ] )
* To display the menu screen or display screen on an
external monitor, set [A/V Set] B [Video Set]
B [Display On TV] to "On".
(A P111 [ Display On TV ] )
144
DEVICE
AV
REMOTE
HOST
DC
SDI IN
HDMI
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code signals,
are output for both the HD-SDI and SD-SDI signals.
User's bit output from the [HD/SD SDI] output terminal
0
is used as a flag to determine valid video signals.
Therefore, accurate values will not be output.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time code
of the built-in time generator as well as playback time
code are also output.
Settings for SDI Down-Converted Output
You can select the method to "down convert" HD
0
video images to SD images during SD-SDI output.
Set using [A/V Set] B [Video Set] B [SD Aspect].
0
The available modes include "Side Cut", "Letter"
0
(blackened at the top and bottom), and "Squeeze" (full
size, compressed at the left and right).
(A P118 [ SD Aspect ] )
Memo :
When [Record Format] B [System] is set to "SD",
0
and [SD Aspect] is set to "4:3", this item cannot be
selected.
(A P116 [ System ] )