JVC GY-HM650U Instructions Manual page 176

Error message
Access Denied.
Invalid Username or
Password.
Invalid Path Was Requested. The path specified for the FTP
Server Error.
Invalid Request.
Invalid Data Size.
Invalid Data Format.
Transfer Error.
Invalid URL.
Media Access Error.
Internal Error.
Other Error.
Media Read Error.
176
Status
Access is denied.
Authentication for login to the FTP
server failed.
server is incorrect.
There was an unintended operation
of the FTP server.
A bad request is executed for the
FTP server.
Invalid data size, such as a planning
metadata size that exceeds 4 KB.
The XML format of the planning
metadata is invalid.
Transfer failed due to
communication failure.
The path was deemed invalid by the
FTP server.
Reading/writing of the SD card
failed while FTP transfer is in
progress.
An internal error has occurred while
FTP transfer is in progress.
An unknown error or other errors
have occurred while FTP transfer is
in progress.
Reading of the SD card failed while
FTP transfer is in progress.
Action
Adjust the Server and Port settings
for [Metadata Server] or [Clip
Server].
(A P124 [ Metadata Server ] )
(A P124 [ Clip Server ] )
Adjust the Username and Password
settings for [Metadata Server] or
[Clip Server].
(A P124 [ Metadata Server ] )
(A P124 [ Clip Server ] )
Adjust the [Clip Server] and [Dir.
Path] settings for [Metadata
Server] or [File Path].
(A P124 [ Metadata Server ] )
(A P124 [ Clip Server ] )
Execute again.
Use a different server.
Execute again.
Adjust the planning metadata saved
in the [Metadata Server].
(A P155 [ Planning Metadata ] )
Adjust the planning metadata saved
in the [Metadata Server].
(A P155 [ Planning Metadata ] )
Execute again.
Adjust the Server and Port settings
for [Metadata Server] or [Clip
Server].
(A P124 [ Metadata Server ] )
(A P124 [ Clip Server ] )
Insert a different SD card.
Adjust the settings and execute
again.
Adjust the settings and execute
again.
Insert a different SD card.