If you are unable to rectify the fault, please
contact your customer service.
Your nearest customer service centre can
be found in the customer service list.
When calling customer service, please
quote the appliance number (1) and the
FD number (2) which can be found on the
on the appliance door.
Please note that a visit by a customer
service technician to repair a malfunction
or one of the described faults will not be
free of charge even during the warranty
Downloaded from DishWasher-Manual.com Manuals
The dishwasher must be connected
correctly, otherwise it will not function
properly. The specifications for the inlet
and outlet as well as the electrical
connected loads must correspond with
the required criteria as specified in the
following paragraphs or in the installation
Install the appliance in the correct
Checking appliance on delivery
Installing the appliance
Install and connect the appliance
according to the installation and
Prior to installation, disconnect the
dishwasher from the power supply.
Ensure that the protective conductor
system of the domestic supply has
been correctly installed.
The electrical connection conditions
must correspond with the specifications
on the dishwasher rating plate.
If the power cord of this appliance
is damaged, it must be replaced with
a particular power cord.
To prevent injury, the power cord may
be replaced by customer service only.
If the dishwasher is installed in a high-
sided unit, the unit must be secured
Install built-under or integratable
appliances only under continuous
worktops which have been screwed
to adjacent cupboards to ensure