Changing the programme
When the START button
pressed, the programme cannot be
The only way a programme can be
changed is by Cancel programme (reset).
The final rinse uses a higher temperature
which improves the drying result.
The running time may increase slightly.
(Caution if utensils are delicate!)
Close the door.
Switch on ON/OFF switch
Hold down programme button A and
press START button
Release both buttons.
The LED for button A flashes and the
digital display displays the factory
Press programme button A until the
factory set value
the digital display
To change the setting,
Press the button C to switch
intensive drying on
Press START button
The set value is saved.
Downloaded from DishWasher-Manual.com Manuals
until on the
is indicated on
Maintenance and care
A regular inspection and maintenance of
your machine will help to prevent faults.
This saves time and prevents problems.
of the machine
Check spray arm for grease and
If you find such deposits:
Fill detergent dispenser with detergent.
Start the appliance without utensils in
the programme with the highest rinsing
Clean the appliance with detergents/
appliance cleaners which are particularly
suitable for use with dishwashers.
Regularly clean door seal with a damp
Never use a steam cleaner to clean your
dishwasher. The manufacturer is not liable
for any consequential damage.
Regularly wipe the front of the appliance
and fascia with a damp cloth; water and
a little washing up liquid are adequate.
Do not use sponges with a rough surface
or abrasive detergents, as these could
scratch the surfaces.
Stainless steel appliances: To prevent
corrosion, avoid using sponge cloths or
wash them out thoroughly several times
before using for the first time.
Never use other chlorinated household
detergents! Health hazard!
Salt and rinse-aid
Check the refill indicators
If required, refill salt and/or rinse-aid.