Winnebago Sunova Operator's Manual page 104

SECTION 9 –
FURNITURE AND SOFTGOODS
Dinette to Bed
1. Remove both dinette back cushions and set
aside.
2. Lift both dinette seat cushions upward.
3. Release the lock rod on the bottom of the
dinette table by pulling down.
9-2
Lock Rod
4. Push table straight down. Lower dinette seat
cushions.
5. Rotate lock rod up to secure table in the
lowered position.
6. Arrange dinette cushions to cover bed area.
NOTE: Additional bolsters may be included with
your dinette to cover bed area.
Reverse steps to convert back into dinette
seating.
Once the table is up, engage the lock rod by
pushing the lock rod up.
Lock Rod