Kenwood BLP60 Instruction Manual page 5

G
Take care when handling the blender as the
goblet and its contents will be very hot.
G
Take particular care when removing the lid.
The lid is designed to be a tight fit to
prevent leakage. If necessary protect your
hands with a cloth or oven gloves when
handling.
G
Ensure the goblet is securely attached to
the base and when removing from the
appliance, guide the base and ensure it is
removed together with the goblet.
G
Ensure that the lid and filler cap are
securely in place before every blending
operation.
G
Always ensure that the vents in the filler cap
are clear before every blending operation
.
G
When fitting the lid to the goblet always
ensure that the lid and goblet rim are clean
and dry to ensure a good seal and prevent
spillage.
before plugging in
G
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
Important - UK only
G
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live.
G
The appliance must be protected by
a 13A approved (BS1362) fuse.
Note:
G
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
G
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
5