Overview Of Setup - Tightrope Media Systems Cablecast SX User Manual

1 Cablecast SX Setup
1.1 Prerequisites

1.2 Overview of Setup

Physical Setup : Starting in chapter 2, you'll learn about the physical connections on the Cablecast
Software Setup : Next, in chapter 3, you be taken through the steps necessary to configure the
Thank you for purchasing a Cablecast SX video server from Tightrope Media
Systems! This guide will walk you through setting up your new server.
Before beginning the installation, please make sure that you have the following
resources available:
An ethernet network connection
A keyboard, mouse, and a VGA monitor
Your existing A/V infrastructure (At least one video monitor, if you're just
testing)
There are three parts to setting up your SX server: Physical Setup, Software Setup,
and Testing.
SX server, and how to tie it into your existing infrastructure.
Cablecast SX server software.
Testing : Finally, in chapter 4, you'll run some simple tests to make sure the Cablecast SX
server is correctly configured and ready to use.
So, without any further delay, let's get started!
1