Assembling The Burners - Haier HCC2230AGS Installation Instructions Manual

24” and 30” gas cooktops
Hide thumbs Also See for HCC2230AGS:
Table of Contents

Advertisement

Assembling the Burners

The electrode of the electronic ignition system is positioned above the surface of the burner base. Do
not remove a burner cap or touch the electrode of a burner while another is turned on. Damage or
electrical shock may occur.
1. Place burner heads over the burner base. Make sure the hole in the burner head is properly
aligned with the electrode in the burner base (see Figure 16).
2. Place the burner caps on the burner heads. Make sure that the burner caps are properly seated
on the burner head (see Figure 17).
Figure 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcc3230ags

Table of Contents