Gas Tank Installation
[]
LPtank is sdd separatdy.
[]
Place LPtank onto furl gauge with tank collar opening facing to the left as shown First hang tank
collar opening over hook in face of gauge. Then rotate gauge latch down over collar and
tighten wing nut to secure coUlar in place.
[]
Connect the regulator
and hose to the tank as shown. Make sure that hose is clipped
to
underside of furl gauge.
_j_j_l!_l_
_
....
....
UTION
Failure to install tank correctly
may allow
gas hose to be damaged
in operation.
30 " 33577-41500319