Kenmore 146.23680310 Use & Care Manual
Kenmore 146.23680310 Use & Care Manual

Kenmore 146.23680310 Use & Care Manual

Liquid propane gas grill
Hide thumbs Also See for 146.23680310:

Advertisement

Use & Care Guide
Manual de Uso y Cuidado
English / Español
Model/Modelo: 146.23680310
Items / Artículo: 640-05057375-7
Kenmore
®
Liquid Propane Gas Grill
Parrilla de LP gas
P/N 50500050
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www.sears.com
www.kmart.com
®

Advertisement

Table of Contents
loading

Summary of Contents for Kenmore 146.23680310

  • Page 1 Use & Care Guide Manual de Uso y Cuidado English / Español Model/Modelo: 146.23680310 Items / Artículo: 640-05057375-7 Kenmore ® Liquid Propane Gas Grill Parrilla de LP gas P/N 50500050 Sears Brands Management Corporation Hoffman Estates, IL 60179 U.S.A. www.kenmore.com www.sears.com...
  • Page 2: For Your Safety

    CAUTION CAUTION CAUTION: Indicates a potentially hazardous situation or For residential use only. Do not use for commercial unsafe practice which, if not avoided, may result in minor or cooking. moderate injury. 2·146.23680310...
  • Page 3: Table Of Contents

    . 28-30 Repair Protection Agreements ® Congratulations on making a smart purchase. Your new Kenmore product is designed and manufactured for years of dependable operation. But like all products, it may require repair from time to time That's when having a Repair Protection Agreement can save you money and aggravation.
  • Page 4: Kenmore Grill Warranty

    KENMORE GRILL WARRANTY . . 2 Kenmore One Year Limited Warranty One Year Full Warranty on Kenmore Grill When installed, operated and maintained according to all supplied instructions, if this appliance fails due to a defect in . . 2 ®...
  • Page 5: Use And Care

    Never leave an LP tank inside a vehicle directory under “Gas Companies” for nearest certified LP which may become overheated by the sun. dealers. • Do not store an LP tank in an area where children play. 146.23680310 •5...
  • Page 6 ▲Do not use household cleaning agents. Damage to the gas nut, holding regulator in a straight line train components (valve/hose/regulator) can result. with LP tank valve so as not to crossth- thread the connection. Nipple has to be centered into the LP tank valve. 6 • 146.23680310...
  • Page 7 • If a leak is detected at any time, STOP and call the fire department. • If you cannot stop a gas leak, immediately close LP cylinder valve and call LP gas supplier or your fire department ! 146.23680310 • 7...
  • Page 8 7. To ignite the Side Burner, follow steps 3-5 using the Side • Always close LP cylinder valve and remove Burner knob. coupling nut before moving LP cylinder from specified operation position. If igniter does not work, follow Match Lighting instructions. 8 • 146.23680310...
  • Page 9 • Cooking surfaces: If a bristle brush is used to clean any of the grill cooking surfaces, ensure no loose bristles remain on cooking surfaces prior to grilling. It is not recommended to clean cooking surfaces while grill is hot. 146.23680310 • 9...
  • Page 10: Spider Alert

    •Store grill indoors ONLY if LP cylinder is turned off and Disconnected, remove from grill and stored outdoors. Electrode • When removing grill from storage, follow “Cleaning the Burner Assembly instructions before starting grill. 10 • 146.23680310...
  • Page 11: Indirect Cooking

    160°F * United States Department of Agriculture Whole Poultry (Turkey, **Allow meat to rest three minutes before carving or consuming. Chicken, Duck, etc.) 165°F Ground or Pieces Poultry 165°F (Chicken Breast, etc.) *United States Department of Agriculture 146.23680310 • 11...
  • Page 12: Parts List

    To order replacement parts after using grill, ® call 1-800-4-MY-HOME NOTE: Some grill parts shown in the assembly steps may differ slightly in appearance from: those on your particular grill model. However, the method of assembly remains the same.: 12·146.23680310...
  • Page 13: Parts Diagram

    PARTS DIAGRAM PARTS DIAGRAM 146.23680310 • 13...
  • Page 14: Before Assembly

    Step 1: Open shipping box by slicing down its edges with a box cutter, take out hardware pack and manual from top. Remove all packing material and parts from top and front of lid. Left Leg Assembly Right Side Panel (Pre-Assembly) 14·146.23680310...
  • Page 15 BEFORE ASSEMBLY Step 2: Remove the left and right Styrofoam from Grill Head. Open grill lid and take out the boxes. Remove all packing material, and take all parts out of boxes. 146.23680310·15...
  • Page 16: Before Assembly

    BEFORE ASSEMBLY Step 3: Take our the Cooking Grates, Warming Rack, Grease Accumulate Panel, Front panel, Left Side Panel and Axle Rod from firebox. 16 • 146.23680310...
  • Page 17: Assembly

    Qty: 1 pc M5X10 screw M5 flat washer Qty: 6 pcs Qty: 4 pcs Qty: 4 pcs Qty: 4 pcs M6X13 screw M6 compression washer Qty: 16 pcs Qty: 8 pcs Qty: 16 pcs Qty: 8 pcs 146.23680310 • 17...
  • Page 18 □ Attach sides of bottom shelf to left and right panel assemblies with (6) M4x10 screws. Do not fully tighten at this time. Cart will not be level. This will be corrected when the front panels and wheels are installed. M4X10 screws Qty: 10pcs side panel Rear Front Left Panel Assembly Right Panel Assembly Bottom Shelf 18·146.23680310...
  • Page 19 □ Attach with (1) Axle washer, nut and hitch pin. Assemble wheels with “cone” side against legs. □ Hammer leg extenders onto left legs. M6X13 screws Qty: 4 pcs Hitch Axle Rod Axle Washer 146.23680310·19...
  • Page 20 □ Attach tank baffle to front panels and bottom shelf with (2) M4x10 screws. □ Attach two front panels together in the center with (1) M4x10 screw. □ Attach bottom front panel to cart in the center with (1) M4x10 screw. M4X10 screws Qty: 12 pcs 20·146.23680310...
  • Page 21 □ Carefully lower the grill head onto the cart. Make sure the regulator hose and igniter wires are hanging outside the cart. Open lid and attach head to cart with (4) M6x13 screws and M6 compression washers. M6X13 screws Qty: 4 pcs M6 compression washers Qty: 4 pcs 146.23680310·21...
  • Page 22 - From outside to inside of firebox with (2) M6x13 screws. (C) □ Attach fascia to control panel with (1) M4x10 screw. (C) M5 flat washers M5X10 screws Qty: 2 pcs Qty: 2 pcs M6X13 screws Qty: 4 pcs M6 compression washers Qty: 2 pcs M4X10 screws Qty: 1 pc 22·146.23680310...
  • Page 23 - From outside to inside of firebox with (2) M6x13 screws. (C) □ Attach fascia to control panel with (1) M4x10 screw. (C) M5 flat washers M5X10 screws Qty: 2 pcs Qty: 2 pcs M6X13 screws Qty: 4 pcs M6 compression washers Qty: 2 pcs M4X10 screws Qty: 1 pc 146.23680310·23...
  • Page 24 □ Unscrew igniter cap from control panel. Insert (1) AAA battery (provided in blister pack) into battery slot with positive end (+) facing outward. Screw igniter cap back onto panel. (J) 24·146.23680310...
  • Page 25 □ Place heat diffusers over burners. Diffusers will fit in firebox in either direction. Fit tabs in firebox front through slots in diffuser tips. Fit diffuser tips inside tabs in firebox rear. □ Place cooking grates onto grate rests. □ Insert warming rack into brackets at top of firebox as shown. 146.23680310·25...
  • Page 26 □ Hang grease cup clip from bottom of grease tray. Place grease cup into grease cup clip.(B) □ Attach back brace to top of cart with (4) M4x10 screws.(C) 26·146.23680310...
  • Page 27 Failure to install grease cup clip and cup Failure to install tank correctly may allow gas hose to be damaged in operation. will cause hot grease to drip from bottom of grill with risk of fire or property damage. 146.23680310·27...
  • Page 28: Troubleshooting

    • Wires are loose or disconnected. • Reconnect wires or replace electrode/wire assembly. • Wires are shorting (sparking) • Replace igniter wire/electrode assembly. between igniter and electrode. • Dead battery. • Replace with a new AAA-size alkaline battery. 28·146.23680310...
  • Page 29 • The worn nozzles don’t have enough “bite” to engage the cylinder. with worn threads. valve. Try a second LP dealer. • Clean carry-over tube(s) with wire brush. One burner does • Grease buildup or food particles in not light from end(s) of carryover tube(s). other burner(s). 146.23680310·29...
  • Page 30: Troubleshooting

    • Electrodes are wet. • Has moisture accumulated • Use paper towel to remove moisture. on electrode and/or in • Electrode(s) cracked burner ports? or broken; sparks appear where • Inspect electrodes for • Replace cracked or broken electrodes. cracked. cracks. 30·146.23680310...

Table of Contents